UPSIC-1205D Compact DC-UPS / 60W / 12V 5A / Supercap / DIN Rail version / DC-DC / EDLC
DC UPS with maintenance-free Supercaps
- Regulated voltage at backup
- Maintenance-free supercaps for energy storage
- High cycle stability up to 500 000
- Charge time <60 sec at maximum charge current
- Extended temperature range -20...+65°C
- Compact DIN rail chassis
- Active reverse polarity protection
- Power Fail signal via relay
- RS232 interface
- Intelligent power sharing
- Reboot Function
- UPScom management software included
- Operation of UPS at host without software possible
- Output release from 90% supercap capacity
- 3 years warranty
Quantity | Unit price |
---|---|
1 to 9 | €284.41 * |
From 10 | €275.48 * |
From 50 | €262.28 * |
From 100 | €253.95 * |
*Prices incl. 19% VAT plus shipping costs
Weight: 0.43 kg
Uninterruptible 12VDC power supply!
Compact and maintenance-free DC UPS modules with Supercaps
The UPSIC-1205D for DIN-rail mounting convinces as a particularly innovative and economical solution for the uninterruptible DC power supply. To protect against voltage fluctuations, flicker, voltage drops or failures in the supply voltage, the DC UPS modules are equipped with ultracapacitors (so-called Supercaps) as energy storage devices that work on the principle of double-layer capacitors (EDLC).
Due to the high cycle stability (> 500,000 charging and discharging cycles), the Supercap UPS solutions have a particularly long service life and are absolutely maintenance-free. This means an increase in long-term availability while minimizing the maintenance effort of the supplied system. Due to the compact dimensions, a high power density and the corresponding interface configuration, the integration into a wide range of sensitive applications is possible.
The compact DC UPS modules guarantee the reliable and uninterruptible power supply of DC consumers such as Low-power embedded IPCs, gateways, motors, sensors, actuators, card readers, cameras, security technology.
Maintenance-free Supercaps as energy storage
Equipped with high-quality 3 Volt Supercaps (4x 100F capacity), the DC UPS modules are fully charged in a maximum of 60 seconds and are designed for fanless 24/7 continuous operation in the extended temperature range from -20 to +70°C. For uninterruptible DC power supplies, there are absolutely maintenance-free long-life Supercaps (ultra-capacitors) available as highly efficient and particularly long-lasting energy storage devices with more than 500,000 charge and discharge cycles in the area of short and medium bridging times. In contrast to batteries, which store energy via a detour through a chemical reaction, Supercaps are based on electrophysical principles and are charged and ready for use within a very short time. Under comparable operating conditions, Supercaps have a service life that is up to ten times longer than that of classic lead-acid batteries. Energy storage systems with supercapacitors also impress with their high current carrying capacity, power density and reliability.
'Power Sharing' with intelligent input current detection
In normal operation, the system electronics forwards the input voltage to the output with a minimal reduction, charges the supercapacitors and monitors the voltage thresholds at the input. If the voltage falls below the defined threshold, the Supercap UPS switches over to UPS backup mode within fractions of a second and provides an uninterruptible and regulated DC voltage supply at the output. The intelligent distribution of the charging currents (PowerSharing) at the input ensures that the upstream AC/DC power supply has not to be oversized, due to the input power is kept constant and is distributed appropriately to the DC load and the Supercap charger. With low load at the output, more energy flows into the Supercap charger and vice versa.
Data monitoring and preprogramming for self-sufficient operation
With help of the UPS Control Center software, settings on the DC UPS can be made conveniently. The software can be downloaded free of charge. In addition, an extensive set of commands enables the direct reading of sensor values and the setting of parameters. The continuous acquisition of operating data allows "data monitoring" in real time. The open communication protocol offers system developers individual options for connecting to their own system.
Shutdown & Reboot function for IPC systems
In the event of a "PowerFail", the DC UPS signals the failure via the integrated interface, so that a controlled shutdown of the computer system is initiated and valuable data can be saved. The integrated reboot function of the DC UPS automatically initiates the restart of the supplied IPC after the supply voltage has returned, without the need for costly on-site intervention by a service employee, e.g. with completely self-sufficient computer systems in inaccessible locations.
Maximum reliability for your 12VDC application
In the field of uninterruptible power supply, our DC UPS systems can be used in a variety of applications for a wide range of industries: Industry 4.0, automation, medical and laboratory technology, transportation, traffic monitoring, energy, communication, vending, POS / payment systems, security technology, mobile systems and many more.
Customer-specific solutions and adjustments for your individual application are possible on request. We are happy to help!
Uninterruptible 12VDC power supply!
Compact and maintenance-free DC UPS modules with Supercaps
The UPSIC-1205D for DIN-rail mounting convinces as a particularly innovative and economical solution for the uninterruptible DC power supply. To protect against voltage fluctuations, flicker, voltage drops or failures in the supply voltage, the DC UPS modules are equipped with ultracapacitors (so-called Supercaps) as energy storage devices that work on the principle of double-layer capacitors (EDLC).
Due to the high cycle stability (≤ 500,000 charging and discharging cycles), the Supercap UPS solutions have a particularly long service life and are absolutely maintenance-free. This means an increase in long-term availability while minimizing the maintenance effort of the supplied system. Due to the compact dimensions, a high power density and the corresponding interface configuration, the integration into a wide range of sensitive applications is possible.
The compact DC UPS modules guarantee the reliable and uninterruptible power supply of DC consumers such as Low-power embedded IPCs, gateways, motors, sensors, actuators, card readers, cameras, security technology.
UPS management software 'UPScom'
with intuitive user interface
The software 'UPScom' (freely available for download) allows the connected devices to be shut down and switched off in a controlled manner during a power failure in order to avoid data loss or damage. The responsive WEB UI is called up in a web browser to set and pre-program all parameters of the DC UPS system and for real-time monitoring with state-of-charge indicator. The adjustable parameters include, among other things, load sensor (mA), shutdown delay, maximum backup time, minimum charge capacity before system start, notifications by email.
Cross-platform technology
'UPScom' uses the new WebAssembly (WASM) architecture, which runs in most current web browsers. 'UPScom' runs on x86 compatible systems and also on most ARM-64 based systems under Microsoft® Windows and various Linux distributions.
Secure Shutdown & Reboot function for IPC systems
In the event of a "power failure", the UPS signals the failure of the supply voltage via the integrated USB or RS232 interface, so that a controlled shutdown of the computer system is initiated and valuable data is saved. A script (batch) can also be executed before the system is shut down in order to process your own application-relevant processes. The integrated reboot function of the DC UPS automatically restarts the supplied IPC after the supply voltage returns, without the need for time-consuming on-site intervention by a service employee, e.g. in the case of completely self-sufficient computer systems at inaccessible locations.
Email messenger service
'UPScom' can be used for various events such as loss of connection to the UPS, system shutdown or power failure. These preventative measures can reduce or eliminate downtime.
Maintenance-free Supercaps as energy storage
Equipped with high-quality 3 Volt Supercaps (4x 100F capacity), the DC UPS modules are fully charged in a maximum of 60 seconds and are designed for fanless 24/7 continuous operation in the extended temperature range from -20 to +65°C. For uninterruptible DC power supplies, there are absolutely maintenance-free long-life Supercaps (ultra-capacitors) available as highly efficient and particularly long-lasting energy storage devices with up to 500,000 charge and discharge cycles in the area of short and medium bridging times. In contrast to batteries, which store energy via a detour through a chemical reaction, Supercaps are based on electrophysical principles and are charged and ready for use within a very short time. Under comparable operating conditions, Supercaps have a service life that is up to ten times longer than that of classic lead-acid batteries. Energy storage systems with supercapacitors also impress with their high current carrying capacity, power density and reliability.
'Power Sharing' with intelligent input current detection
In normal operation, the system electronics forwards the input voltage to the output with a minimal reduction, charges the supercapacitors and monitors the voltage thresholds at the input. If the voltage falls below the defined threshold, the Supercap UPS switches over to UPS backup mode within fractions of a second and provides an uninterruptible and regulated DC voltage supply at the output. The intelligent distribution of the charging currents (PowerSharing) at the input ensures that the upstream AC/DC power supply has not to be oversized, due to the input power is kept constant and is distributed appropriately to the DC load and the Supercap charger. With low load at the output, more energy flows into the Supercap charger and vice versa.
Maximum reliability for your 12VDC application
In the field of uninterruptible power supply, our DC UPS systems can be used in a variety of applications for a wide range of industries: Industry 4.0, automation, medical and laboratory technology, transportation, traffic monitoring, energy, communication, vending, POS / payment systems, security technology, mobile systems and many more.
Customer-specific solutions and adjustments for your individual application are possible on request. We are happy to help!
Output voltage: | 12VDC |
Input voltage: | DC |
Input voltage DC in V: | 12 |
Output current max. convection cooled in A: | 5 |
Output power in W: | 60 |
UPS storage medium: | Supercap |
Mounting: | DIN-Rail |
Feel free to contact us at [email protected].
WEEE-Nr: DE18400369
- 9-pole
- Male-Female
- Length 2000mm
- 9-pole
- Male-Female
- Length 2000mm
- DC UPS with 24V input and 12V output
- SuperCaps as energy storage
- Maintenance-free and fanless
- Interface RS232 & I²C
- Connection cable for UPSIC-2403 / UPSIC-1205 / DC2412-UPS(-LD)
- Twisted pair connector wire 2.54mm
- Length 300mm
- Interface cable for DIN-Rail UPSIC/DC2412 devices
- Connection from IDC 2.0 to SUB-D 9-pin socket
- Length 500mm
- Length 600 mm
- Ends open
- PU: 1 piece
- DC UPS with Li-Ion battery inside
- Minimum load detection
- Power-fail Timer
- Approved to IEC/EN/UL 61010-1
- Length 500 mm (AWG 18)
- Ends open
- PU: 1 piece
- Length 500 mm (AWG 18)
- Ends open
- PU: 1 piece
- DC/DC converter
- Fanless design for conduction cooling
- Selectable output +12V, +19V or +24VDC
- 3 years warranty
- A/B connector
- Length 500 mm
- 28 AWG / 1P+24 AWG / 2C
- Compact 12V DC-UPS
- Supercaps - maintenance-free
- Software UPS Control Center
- Reboot function
- DC UPS with Supercaps inside
- Operating temperature range -20...+65°C
- USB & RS232 Interface
- Incl. UPScom management software
- Compact 24V DC-UPS
- Integrated Supercaps - maintenance-free
- UPScom manegment software incl.
- Reboot function
- Flexible DC-UPS for LiFePO4 and SuperCaps
- USB and RS232 interface
- Incl. UPScom management software
- Advanced battery protection
- DC UPS with 24V input and 12V output
- SuperCaps as energy storage
- Maintenance-free and fanless
- Interface RS232 & I²C
- DC UPS with Supercaps inside
- Operating temperature range -20...+65°C
- Power-fail Timer
- Approved to IEC/EN/UL 61010-1
- Compact 24V DC-UPS
- Supercaps - maintenance-free
- Software UPS Control Center
- Extended temperature range
- DC UPS with Li-Ion battery inside
- Minimum load detection
- Power-fail Timer
- Approved to IEC/EN/UL 61010-1
- DC UPS with LiFePo battery inside
- Operating temperature range -20...+55°C
- USB & RS232 Interface
- Incl. UPScom management software
- DC UPS with Supercaps inside
- Maintenance free and durable
- Power-Fail timer function
- Operating temperature range -20°…+70°C
- Flexible DC-UPS for LiFePo and SuperCaps
- USB and RS232 interface
- Incl. UPScom management software
- Advanced battery protection
- DC UPS with 24V input and 12V output
- SuperCaps as energy storage
- Maintenance-free and fanless
- Interface RS232 & I²C
- DC UPS with 24V input and 12V output
- SuperCaps as energy storage
- Maintenance-free and fanless
- Interface RS232 & I²C
- DC-UPS for lead acid batteries
- Zero switch over time from loss of DC input
- Operating temperature range -20°C to +60°C
- Low budget UPS solution
- Flexible DC-UPS for LiFePO4 and SuperCaps
- USB and RS232 interface
- Incl. UPScom management software
- Advanced battery protection
- DC UPS with LiFePo battery inside
- Powerful and reliable
- USB and RS232 Interface
- Operating temperature range -20°…+55°C
- Reboot function for
- DC2412-UPS(LD) - UPSIC-2403 - UPSIC-1205
- Plug-In solution
- Compact dimensions
- DC UPS with LiFePo battery inside
- Operating temperature range -20…+50°C
- Power-fail Timer
- With UPScom management software
- Outdoor DC UPS
- Protection class IP65 / IP67
- Robust aluminium housing
- Operating temperature range -20...+50°C
- Flexible DC-UPS for LiFePo and SuperCaps
- USB and RS232 interface
- Incl. UPScom management software
- Advanced battery protection
- Flexible DC-UPS for LiFePo and SuperCaps
- USB and RS232 interface
- Incl. UPScom management software
- Advanced battery protection
- DC-UPS for lead acid batteries
- Operation temperature range from -20°C to +60°C
- Full corrosion resistant Aluminium chassis
- Low budget UPS solution
- DC UPS with 24V input and 12V output
- 480F SuperCaps as energy storage
- Maintenance-free and fanless
- Interface RS232 & I²C
- Flexible DC-UPS for LiFePo and SuperCaps
- USB and RS232 interface
- Incl. UPScom management software
- Advanced battery protection
- Fanless design for conduction cooling
- Selectable output +12V, +19V or +24VDC
- Very high efficiency up to 98%
- 3 years warranty
- DC/DC converter
- Fanless design for conduction cooling
- Selectable output +12V, +19V or +24VDC
- 3 years warranty
- DC UPS with 24V input and 12V output
- Additional over voltage protection (load dump)
- SuperCaps - maintenance-free
- Interface RS232 & I²C
- Outdoor DC UPS
- Protection class IP65 / IP67
- Robust aluminium enclosure
- Operating temperature range -20...+50°C
- Outdoor AC/DC UPS for extreme environments in robust aluminium housing
- IP65 protection
- Temperature range -20…+50°C
- IEC/EN 62040-1 certified
- Integrated, space-saving UPS solution
- USB interface
- Reboot function
- Wall bracket available
- Outdoor DC UPS
- Protection class IP65 / IP67
- Robust aluminium enclosure
- Operating temperature range -20...+55°C
- Length 500 mm (AWG 18)
- Ends open
- PU: 1 piece
- Supercap storage for 24V DC UPS
- Maintenance-free and durable
- Extended temperature range
- LiFePO4 battery pack
- Safe, reliable and durable
- Extended temperature range
- IEC 62133-2 safety certification
- Length 500 mm (AWG 18)
- Ends open
- PU: 1 piece
- Supercap storage for 24V DC UPS
- Maintenance-free and durable
- Extended temperature range
- DIN rail chassis
- Universal AC input voltage range
- Ultra slim design
- Operate from -30°C to +70°C with -40°C Cold Start
- Integrated, space-saving UPS solution
- Serial (open collector) interface
- Reboot function
- Wall bracket available
- Interface cable for DIN-Rail UPSIC/DC2412 devices
- Connection from IDC 2.0 to SUB-D 9-pin socket
- Length 500mm
- Supercap storage for 12V DC UPS
- Maintenance-free and durable
- Extended temperature range
- DIN rail chassis