| |
❚ DC UPS SYSTEMS
Maintenance-free DC emergency power supply
24V DC UPS for DIN-Rail mounting
with Supercap energy storage
Avoid system downtimes and data loss!
The new DC UPS compact module UPSI-2406DP2 with maintenance-free ultra-capacitors (so-called Supercaps) reliably bridges power failures, flicker and voltage drops, so that the uninterrupted 24VDC power supply of the connected DC load is ensured. The highly efficient Supercap energy storage device for more than 500,000 cycles can be charged quickly and is extremely durable.
The compact DC UPS modules in a robust DIN rail housing are ideally suited for use in control cabinet applications and decentralized solutions for protecting embedded IPCs, controls, motor drives, sensors, measurement, control and safety technology, etc.
/// 'Power Sharing' with intelligent input current detection
The intelligent 'Power Sharing' at 24VDC input ensures that the upstream AC/DC power supply does not have to be overdimensioned, because the input power is kept constant and appropriately distributed to load and Supercap charger. With a low load at the output, more energy flows into the charger and vice versa. This saves energy and costs.
 |
|
/// Supercap energy storage
In contrast to batteries, which store energy via a detour through a chemical reaction, Supercaps are based on electrophysical principles and are charged and ready for use within a very short time. Under comparable operating conditions, Supercaps have a service life that is up to ten times longer than classic lead-acid batteries. Our energy storage devices with Supercaps also impress with their high current carrying capacity, power density and reliability.
|
/// Ambient temperature range -20...+65°C
The UPSI-2406DP2 works reliably and safely both at sub-zero temperatures and in the extended temperature range up to +65°C. In addition, the Supercap cell balancing ensures optimal charge distribution and high capacity stability over the entire temperature range.
/// Minimum load detection
With help of the integrated load sensor, the DC UPS is switched off as soon as the load value falls below the threshold (no load) so that energy is not used unnecessarily.
All benefits at a glance
✓ Supercaps as maintenance-free energy storage
✓ Cycle Life ≥500,000 charge and discharge cycles
✓ Fast charging in just 2 minutes
✓ Ambient temperature range -20...+65°C
✓ Intelligent input current detection
✓ 'Power sharing' between charger and load
✓ Regulated output voltage in backup mode
✓ Minimum load detection
✓ Relay contact for power fail
✓ Power fail timer function
✓ Shutdown & reboot function (IPC)
✓ USB and RS232 interface
✓ Plug&Play – recognized as UPS by operating system
✓ Extended functionality by
'UPS Gen2 Configuration' software included
✓ Approved to IEC/EN/UL 61010-1 / -2-201
✓ Excellent price-performance ratio
✓ 3 years warranty
/// Plug&Play for quick and easy installation
The DC UPS module has an integrated USB interface for connection to an IPC system. The UPSI-2406DP2 is recognized directly by the operating system as UPS – without additional driver or software installation.
/// Pre-programmable for self-sufficient operation
The included HID Control Center management software is for setting and preprogramming all parameters as well as real-time monitoring of the DC UPS system. It is available for free download with the respective product at our website www.bicker.de.
/// Shutdown & Reboot function for IPC systems
In the event of a "PowerFail", the DC UPS signals the failure via the integrated interface, so that a controlled shutdown of the computer system is initiated and valuable data can be saved. The integrated reboot function of the DC UPS automatically initiates the restart of the supplied IPC after the supply voltage has returned, without the need for costly on-site intervention by a service employee, e.g. with completely self-sufficient computer systems in inaccessible locations.
/// Maximum safety for your 24 VDC application
In the field of uninterruptible power supply, our DC UPS systems can be used in a variety of applications for a wide range of industries: Industry 4.0, automation, medical and laboratory technology, transportation, traffic monitoring, energy, communication, vending, POS/POI, payment systems, security technology and many more.
Customer-specific solutions and adjustments for your individual application are possible on request. We are happy to help!
Imprint | Privacy | Conditions
Bicker Elektronik GmbH | Ludwig-Auer-Strasse 23 | 86609 Donauwoerth | Deutschland / Germany
Phone +49 (0)906 / 70595-0 |
Fax +49 (0)906 / 70595-55 |
Email: info@bicker.de
Copyright © 2020, Bicker Elektronik GmbH, All rights reserved.
|
|
|
