REQUEST PRICE

Fields with * are required

BP-LFP-2725
LiFePo4 battery pack / 25,6V / 2,5Ah / 64Wh / 10 years UPS accu / UN38.3

Safe battery pack with high energy density

  • 10 years long-life battery pack
  • High reliability
  • Safe lithium iron phosphate technology
  • Offers up to 6000 cycles
  • 100% free of lead and cadmium
  • Extended temperature range -20...+55°C
  • High performance BMS system
  • Advanced charging algorithms and cell balancing
  • Integrated protection against deep discharge, over current, over voltage and short circuit
  • Increased safety in the event of overcharging and short-circuiting of the battery pack
  • Compact shrink tube version
  • IEC 62133-2 safety certification
  • UN 38.3 transport certification
Article is immediately available
Quantity
Preis anfragen

Fields with * are required
Quantity Unit price
1 to 9 €318.68 *
From 10 €286.20 *
From 50 €272.51 *
From 100 €263.94 *

*Prices incl. 19% VAT plus shipping costs

Weight: 0.75 kg

The high-quality LiFePO4 battery pack with high-performance BMS system is characterized by a wide... more

Maximum safety and durability!
LiFePO4 high performance battery pack with IEC62133-2 approval for demanding industrial and medical applications

The lithium iron phosphate battery pack BP-LFP-2725 with integrated battery management system (BMS) is designed for applications that place the highest demands on quality, safety and reliability. The intrinsically safe 10 year battery pack with high-energy density is designed for more than 6000 full cycles and is therefore ideally suited for use in particularly demanding applications in the industrial environment and medical technology.

Due to the built-in high-performance LiFePO4 cells in combination with our innovative high current BMS system, the compact BP-LFP-2725 reliably delivers its full performance even at high operating temperatures up to +55°C (up to 15A continuous current) and when frozen at -20°C (up to 6A continuous current). The battery management system perfectly protects the cells from almost all harmful influences and ensures a permanently high capacity. Complex power saving modes prevent the battery pack from discharging quickly when not in use.

 

Low total cost of ownership compared to lead-acid batteries

In contrast to the supposedly cheaper lead-acid/gel/AGM batteries, high-quality lithium iron phosphate cells have an approx. 15-20x longer service life and cycle stability. In addition, 100% of the full nominal capacity of the LiFePO4 battery pack can be continuously withdrawn. Lead-acid batteries have significant limitations in terms of the depth of discharge and number of cycles, too. When calculating the TCO (Total Cost of Ownership) over the entire period of use of at least 10 years, there is a clear cost advantage compared to lead-acid batteries, especially since the effort for maintenance and battery replacement for LiFePO4 is eliminated during this period.

LiFePO4 – lithium iron phosphate
The particularly safe and long-lasting lithium-ion battery technology

The LiFePO4 battery pack BP-LFP-2725 impresses in safety-relevant applications with a particularly stable battery chemistry, a long service life of at least 10 years and more than 6000 full charge and discharge cycles. For all high-performance battery packs, Bicker Elektronik consciously relies on the particularly safe lithium iron phosphate chemistry, which makes thermal runaway almost impossible. Only brand high-performance cells from LithiumWerks are used for the BP-LFP-2725, which clearly stand out from other manufacturers on the market due to their long service life and high cycle stability. The automated production of the high-performance cells ensures consistently high quality. Combined with the specially developed battery management system (BMS), Bicker Elektronik can guarantee the highest level of product safety and reliability. In combination with our DC UPS UPSI-2412, you can implement powerful DC emergency power supply solutions.

Integrated high-performance battery management system (BMS)

The battery management system (BMS) of the BP-LFP-2725 monitors and controls the entire charging and discharging process of each battery cell in the energy storage system. At the same time, the BMS protects the battery pack from dangers such as short circuit, overcurrent, overtemperature, overcharging and deep discharge. A balancing IC permanently measures and controls the cell voltages as well as the current flow and can react to critical changes within microseconds. The LiFePO4 energy storage system also has electronic overcurrent and short circuit protection so that the battery pack is not damaged in the event of an assembly error. The same applies to overvoltage and undervoltage in the cells. In addition to the MOSFET safety circuit on the battery management system, a special thermal fuse protects the battery pack from the risk of overcharging as a second safety level. A 20A fuse is also installed as a second safety level in the event of a short circuit.

 

System present function for increased safety

With the system present function, the output of the battery pack remains deactivated (output voltage = 0 V) until it is connected to the DC UPS unit via the communication connector (BAT-DATA) and enabled. Since the components on the BMS board run in standby mode, this power-saving function increases the shelf life of the (charged) battery pack.

Effective 'cell balancing' for long-term high performance

The integrated cell balancing ensures a balanced and uniform charge of all cells, so that the full capacity of the lithium-ion battery pack remains permanently usable. Intelligent balancing algorithms continuously control the LiFePO4 cells. In the event of deviations, the individual cells are adjusted to one another with a balancing current of ~100mA during the charging process. This has a particularly positive effect on the service life, number of cycles and capacity of the energy storage device. You can find detailed information on this topic in our Whitepaper "Choosing the right battery technology for long-lasting and safe DC UPS systems".

FAQ - Questions & Answers

In which applications can the battery pack be used?

The BP-LFP-2725 uses high-performance lithium iron phosphate cells and is safety-tested in accordance with IEC62133-2. It is therefore ideally suited for all industrial and medical applications.

 

How long is the lifetime of the battery pack?

The BP-LFP-2725 is a particularly high-quality and durable 10 year long-life energy storage device. With the LiFePO4 battery cells, approx. 10 times more charging cycles are possible than with a standard Li-ion battery, as well as approx. 15-20 times more charging cycles than with conventional lead batteries.

 

How high is the cycle stability of the battery pack?

With the BP-LFP-2725, more than 6000 full cycles (charge and discharge cycles) are possible with normal use.

 

Does the battery pack have a BMS control?

Thanks to the integrated high-performance battery management system (BMS), the cells are perfectly protected from almost all harmful influences and dangers from the outside (short circuit, overcurrent, overtemperature, overcharging and deep discharge). In addition, the BMS ensures balanced and evenly charged cells within the battery compound and thus ensures a permanently high capacity of the LiFePO4 energy storage device.

 

In which temperature range can the battery pack be used?

Charge -20…+55°C / Discharge -20…+55°C

 

Is the battery pack intrinsically safe?

Yes, the BP-LFP-2725 is intrinsically safe. The built-in BMS protects the cells from all harmful external influences. All critical error states are safeguarded redundantly. Even in the unlikely event that the MOSFET main switch is defective, a special thermal fuse protects the battery pack from overcharging the cells. The particularly stable battery chemistry also makes a thermal runaway almost impossible.

 

How long is the possible bridging time of the battery pack?

~70min@50W load / ~33min@100W load / ~18min@240W load
(Tested and measured in combination with the DC UPS BICKER UPSI-2412)

 

In which designs is the battery pack available?

The LiFePO4 energy storage systems from Bicker Elektronik are available in two versions: Compact and shrunk for flexible system integration as well as in a robust aluminium chassis for DIN rail mounting.

 

What transport and safety approvals does the battery pack have?

The BP-LFP-2725 is tested and certified according to
• UN38.3 transport approval
• IEC62133-2 safety approval

Maximum safety and durability!
LiFePO4 high performance battery pack with IEC62133-2 approval for demanding industrial and medical applications

The lithium iron phosphate battery pack BP-LFP-2725 with integrated battery management system (BMS) is designed for applications that place the highest demands on quality, safety and reliability. The intrinsically safe 10 year battery pack with high-energy density is designed for more than 6000 full cycles and is therefore ideally suited for use in particularly demanding applications in the industrial environment and medical technology.

Due to the built-in high-performance LiFePO4 cells in combination with our innovative high current BMS system, the compact BP-LFP-2725 reliably delivers its full performance even at high operating temperatures up to +55°C (up to 15A continuous current) and when frozen at -20°C (up to 6A continuous current). The battery management system perfectly protects the cells from almost all harmful influences and ensures a permanently high capacity. Complex power saving modes prevent the battery pack from discharging quickly when not in use.

 

Low total cost of ownership compared to lead-acid batteries

In contrast to the supposedly cheaper lead-acid/gel/AGM batteries, high-quality lithium iron phosphate cells have an approx. 15-20x longer service life and cycle stability. In addition, 100% of the full nominal capacity of the LiFePO4 battery pack can be continuously withdrawn. Lead-acid batteries have significant limitations in terms of the depth of discharge and number of cycles, too. When calculating the TCO (Total Cost of Ownership) over the entire period of use of at least 10 years, there is a clear cost advantage compared to lead-acid batteries, especially since the effort for maintenance and battery replacement for LiFePO4 is eliminated during this period.

LiFePO4 – lithium iron phosphate
The particularly safe and long-lasting lithium-ion battery technology

The LiFePO4 battery pack BP-LFP-2725 impresses in safety-relevant applications with a particularly stable battery chemistry, a long service life of at least 10 years and more than 6000 full charge and discharge cycles. For all high-performance battery packs, Bicker Elektronik consciously relies on the particularly safe lithium iron phosphate chemistry, which makes thermal runaway almost impossible. Only brand high-performance cells from LithiumWerks are used for the BP-LFP-2725, which clearly stand out from other manufacturers on the market due to their long service life and high cycle stability. The automated production of the high-performance cells ensures consistently high quality. Combined with the specially developed battery management system (BMS), Bicker Elektronik can guarantee the highest level of product safety and reliability. In combination with our DC UPS UPSI-2412, you can implement powerful DC emergency power supply solutions.

Integrated high-performance battery management system (BMS)

The battery management system (BMS) of the BP-LFP-2725 monitors and controls the entire charging and discharging process of each battery cell in the energy storage system. At the same time, the BMS protects the battery pack from dangers such as short circuit, overcurrent, overtemperature, overcharging and deep discharge. A balancing IC permanently measures and controls the cell voltages as well as the current flow and can react to critical changes within microseconds. The LiFePO4 energy storage system also has electronic overcurrent and short circuit protection so that the battery pack is not damaged in the event of an assembly error. The same applies to overvoltage and undervoltage in the cells. In addition to the MOSFET safety circuit on the battery management system, a special thermal fuse protects the battery pack from the risk of overcharging as a second safety level. A 20A fuse is also installed as a second safety level in the event of a short circuit.

 

System present function for increased safety

With the system present function, the output of the battery pack remains deactivated (output voltage = 0 V) until it is connected to the DC UPS unit via the communication connector (BAT-DATA) and enabled. Since the components on the BMS board run in standby mode, this power-saving function increases the shelf life of the (charged) battery pack.

Effective 'cell balancing' for long-term high performance

The integrated cell balancing ensures a balanced and uniform charge of all cells, so that the full capacity of the lithium-ion battery pack remains permanently usable. Intelligent balancing algorithms continuously control the LiFePO4 cells. In the event of deviations, the individual cells are adjusted to one another with a balancing current of ~100mA during the charging process. This has a particularly positive effect on the service life, number of cycles and capacity of the energy storage device. You can find detailed information on this topic in our Whitepaper "Choosing the right battery technology for long-lasting and safe DC UPS systems".

FAQ - Questions & Answers

In which applications can the battery pack be used?

The BP-LFP-2725 uses high-performance lithium iron phosphate cells and is safety-tested in accordance with IEC62133-2. It is therefore ideally suited for all industrial and medical applications.

 

How long is the lifetime of the battery pack?

The BP-LFP-2725 is a particularly high-quality and durable 10 year long-life energy storage device. With the LiFePO4 battery cells, approx. 10 times more charging cycles are possible than with a standard Li-ion battery, as well as approx. 15-20 times more charging cycles than with conventional lead batteries.

 

How high is the cycle stability of the battery pack?

With the BP-LFP-2725, more than 6000 full cycles (charge and discharge cycles) are possible with normal use.

 

Does the battery pack have a BMS control?

Thanks to the integrated high-performance battery management system (BMS), the cells are perfectly protected from almost all harmful influences and dangers from the outside (short circuit, overcurrent, overtemperature, overcharging and deep discharge). In addition, the BMS ensures balanced and evenly charged cells within the battery compound and thus ensures a permanently high capacity of the LiFePO4 energy storage device.

 

In which temperature range can the battery pack be used?

Charge -20…+55°C / Discharge -20…+55°C

 

Is the battery pack intrinsically safe?

Yes, the BP-LFP-2725 is intrinsically safe. The built-in BMS protects the cells from all harmful external influences. All critical error states are safeguarded redundantly. Even in the unlikely event that the MOSFET main switch is defective, a special thermal fuse protects the battery pack from overcharging the cells. The particularly stable battery chemistry also makes a thermal runaway almost impossible.

 

How long is the possible bridging time of the battery pack?

~70min@50W load / ~33min@100W load / ~18min@240W load
(Tested and measured in combination with the DC UPS BICKER UPSI-2412)

 

In which designs is the battery pack available?

The LiFePO4 energy storage systems from Bicker Elektronik are available in two versions: Compact and shrunk for flexible system integration as well as in a robust aluminium chassis for DIN rail mounting.

 

What transport and safety approvals does the battery pack have?

The BP-LFP-2725 is tested and certified according to
• UN38.3 transport approval
• IEC62133-2 safety approval

"BP-LFP-2725"
The high-quality LiFePO4 battery pack with high-performance BMS system is characterized by a wide operating temperature range. With up to 6,000 charge/discharge cycles, the battery pack guarantees a long service life. In addition, the LiFePO4 pack offer a high energy density.
Mounting: Verschrumpft
Storage technology: LiFePO4
Energy in kj: 230,4
Energy in Wh: 64

WEEE-Nr: DE18400369

"BP-LFP-2725"
UPSI-2412D Intelligente DC-USV
240W / 24VDC 10A
  • Flexible DC-UPS for LiFePo and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €353.07 incl. VAT.
Article is immediately available
MP1S-6400V-B1 PC-Netzteil für Medizintechnik / 1HE
400W / ATX +24VDC / Medical
  • Additional +24VDC output
  • Ideal for applications with large monitors
  • High efficiency of 84%
1-9 pieces €353.07 incl. VAT.
Article currently not available
X1-132 Netzkabel Schuko / IEC-60320-C13
Power cord IEC-60320-C13 connector
  • Power cord / IEC-320-C13
  • 3G 0,75mm², Length: 1800 mm
1-9 pieces €7.62 incl. VAT.
Article is immediately available
UPSI-2412 Intelligente DC-USV
240W / 24VDC 10A
  • Flexible DC-UPS for LiFePo and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €294.64 incl. VAT.
Article is immediately available
PSZ-1077 Haltebügel für Batteriepack BP-LFP-2725
Mounting bracket for BP-LFP-2725
  • Fixation support incl. rubber
  • 2 pcs set
1-9 pieces €12.14 incl. VAT.
Article is immediately available
CB-RS-020 RS232-Kabel / 9 polig / Stecker- Buchse / 2000mm
RS232 cable / 9-pole
  • 9-pole
  • Male-Female
  • Length 2000mm
1-9 pieces €4.28 incl. VAT.
Article is immediately available
CB-105-3-600 AC-Leitung / 3-polig / PE: Ringkabelschuh M3
AC input cable, 3-pole
  • Length 600 mm
  • Ends open
  • PE: ring cable lug M3
1-9 pieces €5.95 incl. VAT.
Article is immediately available
CB-102-09-600 DC-Ausgangsleitung für BEO-2500M Serie
DC output cable for BEO-2500M series
  • Accessory for BEO-2500M series
  • Length 600 mm
  • Ends open
  • PU: 1 piece
1-9 pieces €5.36 incl. VAT.
Article is immediately available
BP-SUC-16090 Supercap Pack 13,5 kJ / 15,2V
Energy storage 13.5 kJ
  • Supercap storage for 24V DC UPS
  • Maintenance-free and durable
  • Extended temperature range
1-9 pieces €161.96 incl. VAT.
Article is immediately available
UPSI-2412 Intelligente DC-USV
240W / 24VDC 10A
  • Flexible DC-UPS for LiFePo and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €294.64 incl. VAT.
Article is immediately available
UPSI-2406 Intelligente DC-USV
144W / 24VDC 6A
  • Flexible DC-UPS for LiFePo and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €194.80 incl. VAT.
Article is immediately available
BP-LFP-13250S LiFePo4 Batteriepack
Batterypack 13,2V / 330Wh
  • LiFePO4 battery pack
  • Extended temperature range -20…+55°C
  • Very high storage capability
  • Ideal for long-term backups
1-9 pieces €355.33 incl. VAT.
Article is immediately available
BP-LFP-2725D LiFePo4 Batteriepack
Batterypack 25,6V / 64Wh
  • LiFePO4 battery pack (DIN rail)
  • Safe, reliable and durable
  • Extended temperature range
  • IEC 62133-2 safety certification
1-9 pieces €394.01 incl. VAT.
Article is immediately available
UPSI-2412D Intelligente DC-USV
240W / 24VDC 10A
  • Flexible DC-UPS for LiFePo and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €353.07 incl. VAT.
Article is immediately available
BP-LFP-1325S LiFePo4 Batteriepack
Batterypack 13,2V / 33Wh
  • LiFePO4 battery pack
  • Safe, reliable and durable
  • Extended temperature range
  • IEC 62133-2 safety certification
1-9 pieces €176.60 incl. VAT.
Article is immediately available
UPSI-2412DP3 Intelligente DC-USV mit LiFePO4
240W / 24VDC 10A
  • DC UPS with LiFePo battery inside
  • Powerful and reliable
  • USB and RS232 Interface
  • Operating temperature range -20°…+55°C
1-9 pieces €690.56 incl. VAT.
Article is immediately available
UPSI-2406DP1 Intelligente DC-USV / DIN Rail
96W / 24VDC 4A
  • DC UPS with Li-Ion battery inside
  • Minimum load detection
  • Power-fail Timer
  • Approved to IEC/EN/UL 61010-1
1-9 pieces €237.05 incl. VAT.
Article is immediately available
UPSI-2406DP3 Intelligente DC-USV / DIN Rail Version
144W / 24VDC 6A
  • DC UPS with LiFePo battery inside
  • Operating temperature range -20…+50°C
  • Power-fail Timer
  • With UPScom management software
1-9 pieces €391.75 incl. VAT.
Article is immediately available
UPSI-2406D Intelligente DC-USV
144W / 24VDC 6A
  • Flexible DC-UPS for LiFePo and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €243.47 incl. VAT.
Article is immediately available
BP-SUC-30090 Supercap Pack 13,5 kJ / 30V
Energy storage 13.5 kJ
  • Supercap storage for 24V DC UPS
  • Maintenance-free and durable
  • Extended temperature range
1-9 pieces €182.55 incl. VAT.
Article is immediately available
UPSI-1208 Intelligente DC-USV
96W / 12VDC 8A
  • Flexible DC-UPS for LiFePO4 and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €199.68 incl. VAT.
Article is immediately available
PSZ-1077 Haltebügel für Batteriepack BP-LFP-2725
Mounting bracket for BP-LFP-2725
  • Fixation support incl. rubber
  • 2 pcs set
1-9 pieces €12.14 incl. VAT.
Article is immediately available
BP-LFP-1025S LiFePo4 Batteriepack
Batterypack 9,9V / 25Wh
  • LiFePO4 battery pack
  • Safe, reliable and durable
  • Extended temperature range
  • IEC 62133-2 safety certification
1-9 pieces €158.03 incl. VAT.
Article is immediately available
BP-SUC-16090 Supercap Pack 13,5 kJ / 15,2V
Energy storage 13.5 kJ
  • Supercap storage for 24V DC UPS
  • Maintenance-free and durable
  • Extended temperature range
1-9 pieces €161.96 incl. VAT.
Article is immediately available
UPSI-2406IP-12U Robuste DC-USV / IP65/67 Gehäuse
144W / 24VDC 6A
  • Outdoor DC UPS
  • Protection class IP65 / IP67
  • Robust aluminium enclosure
  • Operating temperature range -20...+50°C
1-9 pieces €653.43 incl. VAT.
Article is immediately available
UPSI-2406IP-26U Robuste DC-USV / IP65/67 Gehäuse
144W / 24VDC 6A
  • Outdoor DC UPS
  • Protection class IP65 / IP67
  • Robust aluminium enclosure
  • Operating temperature range -20...+55°C
1-9 pieces €916.30 incl. VAT.
Article is immediately available
UPSI-2406IP-38AC Robuste AC-DC USV / IP65 Gehäuse
144W / 24VDC / 6A
  • Outdoor AC/DC UPS for extreme environments in robust aluminium housing
  • IP65 protection
  • Temperature range -20…+50°C
  • IEC/EN 62040-1 certified
1-9 pieces €1,422.05 incl. VAT.
Article is immediately available
BP-LFP-10250S LiFePo4 Batteriepack
Batterypack 9,9V / 247Wh
  • LiFePO4 battery pack
  • Safe, reliable and durable
  • Extended temperature range
  • For extended long time backups
1-9 pieces €320.70 incl. VAT.
Article is immediately available
UPSI-1208DP3 Intelligente DC-USV / DIN Rail
96W / 12VDC 8A
  • DC UPS with LiFePo battery inside
  • Operating temperature range -20...+55°C
  • USB & RS232 Interface
  • Incl. UPScom management software
1-9 pieces €380.68 incl. VAT.
Article is immediately available
BP-LIO-1525 Li-Ion Batteriepack
Batterypack 14,8V / 37Wh
  • IEC/EN and UL 62133-2 approved
  • System present function
  • Integrated temperature sensor
  • High energy density
1-9 pieces €56.76 incl. VAT.
Article is immediately available
UPSIC-2403 Kompakte DC-USV
72W / 24VDC 3A
  • Compact 24V DC-UPS
  • Supercaps - maintenance-free
  • Software UPS Control Center
  • Extended temperature range
1-9 pieces €192.30 incl. VAT.
Article is immediately available
UPSIC-1205 Kompakte DC-USV
60W / 12VDC 5A
  • Compact 12V DC-UPS
  • Supercaps - maintenance-free
  • Software UPS Control Center
  • Reboot function
1-9 pieces €197.18 incl. VAT.
Article is immediately available
UPSI-2412DP2 Intelligente DC-USV mit Supercaps
240W / 24VDC 10A
  • DC UPS with Supercaps inside
  • Maintenance free and durable
  • Power-Fail timer function
  • Operating temperature range -20°…+70°C
1-9 pieces €535.62 incl. VAT.
Article is immediately available
UPSI-2406DP2 Intelligente DC-USV / DIN Rail
96W / 24VDC 4A
  • DC UPS with Supercaps inside
  • Operating temperature range -20...+65°C
  • Power-fail Timer
  • Approved to IEC/EN/UL 61010-1
1-9 pieces €301.90 incl. VAT.
Article is immediately available
DC300WS DC/DC-Wandler mit wählbarer Ausgangsspannung
300W / 6-36VDC Input
  • Fanless design for conduction cooling
  • Selectable output +12V, +19V or +24VDC
  • Very high efficiency up to 98%
  • 3 years warranty
1-9 pieces €175.64 incl. VAT.
Article is immediately available
UPSI-1208D Intelligente DC-USV
96W / 12VDC 8A
  • Flexible DC-UPS for LiFePO4 and SuperCaps
  • USB and RS232 interface
  • Incl. UPScom management software
  • Advanced battery protection
1-9 pieces €250.73 incl. VAT.
Article is immediately available
DC160WS DC/DC Wandler mit wählbarer Ausgangsspannung
160W / 6-36VDC Input
  • DC/DC converter
  • Fanless design for conduction cooling
  • Selectable output +12V, +19V or +24VDC
  • 3 years warranty
1-9 pieces €71.28 incl. VAT.
Article is immediately available
BP-LFP-1025SD LiFePo4 Batteriepack
Batterypack 9,9V / 25Wh
  • LiFePO4 battery pack (DIN rail)
  • Safe, reliable and durable
  • Extended temperature range
  • Intelligent deep discharge protection
1-9 pieces €224.32 incl. VAT.
Article is immediately available
UPSI-2406IP-26UW Robuste DC-USV / IP65/67 Gehäuse
110W / 8-36VDC / 24VDC 4,6A
  • Outdoor DC UPS
  • Protection class IP65 / IP67
  • Robust aluminium enclosure
  • Operating temperature range -20...+55°C
1-9 pieces €1,041.84 incl. VAT.
Article is immediately available
UPSI-1208IP-11U Robuste DC-USV / IP65/67 Gehäuse
96W / 12VDC 8A
  • Outdoor DC UPS
  • Protection class IP65 / IP67
  • Robust aluminium housing
  • Operating temperature range -20...+50°C
1-9 pieces €641.41 incl. VAT.
Article is immediately available
BP-LFP-1325SD LiFePo4 Batteriepack
Batterypack 13,2V / 33Wh
  • LiFePO4 battery pack (DIN rail)
  • Safe, reliable and durable
  • Extended temperature range
  • IEC 62133-2 safety certification
1-9 pieces €242.88 incl. VAT.
Article is immediately available
DRU-24V40ABN Industrie DC-USV / DIN Rail
960W / 24V / 40A
  • DC-UPS for lead acid batteries
  • Operation temperature range from -20°C to +60°C
  • Full corrosion resistant Aluminium chassis
  • Low budget UPS solution
1-9 pieces €68.90 incl. VAT.
Article is immediately available
DRU-24V10ACZ Industrie DC-USV / DIN Rail
240W / 24V / 10A
  • DC-UPS for lead acid batteries
  • Zero switch over time from loss of DC input
  • Operating temperature range -20°C to +60°C
  • Low budget UPS solution
1-9 pieces €46.05 incl. VAT.
Article is immediately available
DC161W DC-ATX Wandler
160W / 6-36VDC Input
  • DC-ATX converter
  • Flexible cable management
  • Extended temperature range
  • 3 years warranty
1-9 pieces €103.05 incl. VAT.
Item can be pre-ordered
DC2412-UPSP2 DC/DC-Wandler mit USV-Funktion
60W / 16-32VDC / 12VDC 5A
  • DC UPS with 24V input and 12V output
  • 480F SuperCaps as energy storage
  • Maintenance-free and fanless
  • Interface RS232 & I²C
1-9 pieces €256.09 incl. VAT.
Article is immediately available
UPSI-1208DP2 Intelligente DC-USV / DIN Rail
96W / 12VDC 8A
  • DC UPS with Supercaps inside
  • Operating temperature range -20...+65°C
  • USB & RS232 Interface
  • Incl. UPScom management software
1-9 pieces €287.74 incl. VAT.
Article is immediately available
BP-2425 CYCLON Batteriepack
Batterypack 24V / 2.5 Ah
  • Temperature range -30...+70 °C
  • Long service life
  • Quick charging possible
1-9 pieces €235.14 incl. VAT.
Article is immediately available
IUPS-401 Integrierte USV
400VA / 230VAC / 50/60Hz
  • Integrated, space-saving UPS solution
  • USB interface
  • Reboot function
  • Wall bracket available
1-9 pieces €235.50 incl. VAT.
Article is immediately available
BP-SUC-1645 Supercap Pack 6,8 kJ / 15,2V
Energy storage 6.8 kJ
  • Supercap storage for 24V DC UPS
  • Maintenance-free and durable
  • Extended temperature range
1-9 pieces €104.72 incl. VAT.
Article is immediately available
Show prices with or without vat?
To show you relevant prices please select if your purchase will be private or commercial.
Please select:
Comercial (net)
Show prices without vat
Private (gross)
Show prices including vat