BEO-1000M
100 Watt
- Tested for industrial and medical applications
- Extremly slim, installation height only 26.7 mm!
- 100 Watt continuous fanless power
The power supply series BEO-1000M is characterized by its high efficiency of up to 91 % and a very low standby uptake rate of <0.5 watts. It delivers its full power of 100 watts up to an ambient temperature of +50 °C without active cooling. Thanks to the high quality of the installed parts and its excellent circuit design, high reliability and long economic life are guaranteed. The BEO-1000M series is tested for medical and industrial applications.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC, active PFC |
| Input frequency |
47…63 Hz |
| Input current |
1.5 A (100 VAC) / 0,5 A (240 VAC) |
| Inrush current |
<80 A (240 VAC) |
| Efficiency |
83…91 % depending on model |
| Standby consumption |
<0.5 W at 0 A load |
| Hold up time |
App. 16 ms |
| Protection |
Short circuit protection: Switch off with auto recovery |
| Line regulation |
±0.5 % at nominal load and input voltage change from 90 to 264 VAC |
| Load regulation |
±1 % (A1, load step from 100 % to 10 %) |
| Earth leakage current |
<300 µA max. |
| Safety / EMC |
TÃœV (IEC/EN60601-1 3rd Edition), UL (UL60601-1) |
| Operating temperature |
-20…+70 °C |
| Derating |
+50…+70 °C / 2.5 % / °C (fanless) |
| MTBF |
200 000 h at +25 °C / 115 V AC according to MIL-HDBK-217F |
| Storage temperature |
-20…+85 °C |
| Operating humidity |
5…93 % RH, non-condensing |
| Dimensions (WxDxH) |
76.2 x 127 x 26.7 mm ±1 mm |
| Weight (net) |
0.27 kg |
| Product-specific data |
|---|
| Remote sense |
Control range 0.5 V |
| Max operation height |
2000 m |
| Adjustment range / VR |
±5 % |
|
Article |
Output |
Output current |
Output current |
Ripple & |
Efficiency |
|---|---|---|---|---|---|
| BEO-1005M |
+5 V |
0 A |
20 A |
<100 mVss |
83 % |
| BEO-1007M |
+7.5 V |
0 A |
13.4 A |
<150 mVss |
87 % |
| BEO-1009M |
+9 V |
0 A |
11.2 A |
<90 mVss |
88 % |
| BEO-1012M |
+12 V |
0 A |
8.4 A |
<120 mVss |
89 % |
| BEO-1015M |
+15 V |
0 A |
6.7 A |
<150 mVss |
89 % |
| BEO-1018M |
+18 V |
0 A |
5.6 A |
<180 mVss |
90 % |
| BEO-1024M |
+24 V |
0 A |
4.2 A |
<240 mVss |
91 % |
| BEO-1028M |
+28 V |
0 A |
3.6 A |
<280 mVss |
91 % |
| BEO-1036M |
+36 V |
0 A |
2.8 A |
<360 mVss |
91 % |
| BEO-1048M |
+48 V |
0 A |
2.1 A |
<480 mVss |
91 % |
100 W continuous power without fan (-20…+50 °C), from +50…+70 °C a 100 LFM/28 m3/h fan is needed. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 100 nF and 220 µF capacitors at the output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| X1-024 | AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open | link to the product |
| X1-061 | AC input cable harness / 3 pole / Length: 600 mm / AWG18 / Ends open | link to the product |
| CB-BEO-1000M | DC output cable harness / 8-pole / Length 600 mm / AWG 18 | link to the product |
