mNSP3-450P-USB

300 Watt

  • PC PSU for medical applications with UPS function
  • Various battery packs
  • With USB interface

The UPS PC power supply protects medical computers and PCs in surgeries against system failures due to voltage fluctuations or mains power failure. It combines the functions of a PC power supply with those of an uninterruptible power supply (UPS). The required energy is supplied by separate battery packs. The mNSP3 has been certified according to the international standards of medical engineering IEC 60601-1. For supervision and automatic shut-down a UPS Management Software monitors the power supply.

Technical data

 

Input voltage

85…264 VAC, active PFC

Input frequency

47…63 Hz

Input current

6 A max. (115 VAC), 3 A max. (230 VAC)

Inrush current

<31 A (100 VAC) / <75 A (240 VAC)

Efficiency

77 % typ. (240 VAC)

Power-Good-Signal

Switch on delay 100…500 ms
Switch off delay 1 ms

Protection

Short circuit protection: at each output
Overvoltage protection: +5 V (5.7…7.0 V) / +3.3 V (3.6…4.3 V) / +12 V (13.4…15.6 V), switch off

Earth leakage current

<0,5 mA / 264 VAC

Safety / EMC

IEC 60601-1 3rd Edition, IEC 60950-1, UL 60601-1, UL 60950-1, CSA C22.2 No 60950-1-7, CE

Operating temperature

0…+60 °C

Derating

85…90 VAC at 90 % load / 45…60 °C 2 % / K

MTBF

83 000 h

Storage temperature

-25…+70 °C

Operating humidity

10 % to 90 % RH, non-condensing

Dimensions (WxDxH)

150 x 140 x 86 mm ±0.5 mm

Weight (net)

1.8 kg

Product-specific data

Battery types

BP-2423N: (2 x 12 V / 2.3 Ah), maintenance-free lead batteries
RBS02A-P24/2.3L: (2 x 12 V / 2.3 Ah), maintenance-free lead batteries in clip-on frame
BS10A-H24/2.0L: NiMH-battery with integrated charger

Back-up time

BP-2423N: app. 2 min. at 100 %  charge, app. 6 min. at 50 % charge
 RBS02A-P24/2.3L: app. 2 min. at 100 %  charge, app. 6 min. at 50 % charge
BS10A-H24/2.0L: app. 3.5 min. at 100 % charge, app. 11 min. at 50 % charge

Battery charge current

0.5 A max., battery is also charged when the PC is switched off

Battery charger

27.3 V, temperature compensated

Battery control

19 V ±0.5 V „Batterie low“ trigging
17 V ±0.5 V „Shut down“ trigging

Power failure

Change-over point 75 VAC

Fan switch

HIGH: always full speed
LOW: temperature controlled speed

Optional accessories

Article-No.

Designation

BP-2423N Battery pack with lead batteries 24 V / 2.3 Ah link to the product
RBS02A-P24/2.3L Battery pack with lead batteries, removable (clip-on frame) link to the product
BS10A-H24/2.0L Battery pack with NiMH-batteries 24 V / 2.0 Ah link to the product
ENSP3-REBOOT Automatic startup PC board link to the product
ENSP3-USB-INT Internal USB interface holder link to the product
RUPS 2000-B1 UPS Management Software (CD-ROM) link to the product
BP-2425N Battery pack, 24 V/2.5 Ah link to the product
Technical documentation:
© 2008-2012  |  BICKER ELEKTRONIK GmbH - Ludwig-Auer-Straße 23 - 86609 Donauwörth (DE)
Phone +49 (0)906 / 70595-0 - Fax +49 (0)906 / 70595-55