SNP-Z10M series

130 Watt

  • 100 Watt continuous fanless power
  • High efficiency up to 85 %
  • EN60601-1 and UL60601-1 certified

The SNP-Z10M power supply series has been tested and approved for medical applications. By its high efficiency ranging from 80 to 85 % fanless and, thus, very quiet operation is made possible. The SNP-Z10M series is made up of high-grade components and provides overload, short circuit and overvoltage protection. Optionally, AC and DC cable harnesses as well as a casing are available for all models.

SNP-Z10, Power Supply for industrial and medical applications

Technical data

  

Input voltage

90…264 VAC, 130…370 VDC

Input frequency

47…63 Hz

Input current

2.6 A / 115 VAC, 1.3 A / 230 VAC

Inrush current

<30 A / 115 VAC, <60 A / 230 VAC

Efficiency

80…85 %, depending on model

Hold up time

App. 20 ms / 115 VAC and 100 Watt

Protection

Short circuit protection: Switch off with auto-recovery
Overload protection: Switch off with auto-recovery
Overvoltage protection: Switch off (model / response threshold)
SNP-Z101M, -Z104M, -Z106M / (5.7 V…7 V), SNP-Z107M / (13.1 V…15.1 V), SNP-Z108M / (16.6 V…20.1 V), SNP-Z109M / (26.2 V…31 V), SNP-Z10TM / (55 V…62 V), SNP-Z10HM / (30 V…34 V)

Line regulation

±0.5 % at rated load and input voltage change from 90 to 264 VAC

Load regulation

±1 % (A1, load step ±40 % related to 60 % load, without fan)
±5 % (A2-A3, at 60 % load)

Earth leakage current

<300 µA max. (240 VAC / 60 Hz)

Safety / EMC

TÃœV (EN60601-1), UL (UL60601-1), CE

Operating temperature

0…+50 °C / 100 W with convection, SNP-Z106M: 0…+40 °C / 100 W

Derating

+50…+70 °C / 2.5 % / K, SNP-Z106M: +40…+70 °C / 2.5 % / K

Storage temperature

-20…+85 °C

Operating humidity

5…95% RH, non-condensing

Dimensions

127 x 76.2 x 32.4 mm ±0.5 mm / SNP-Z106M, -Z107M, -Z109M, -Z10HM
127 x 76.2 x 34.4 mm ±0.5 mm / SNP-Z101M, -Z104M, -Z108M, -Z10TM

Weight (net)

0.3 kg
Product-specific data

Remote sense

Regulation range 0.5 V (except SNP-Z101M, SNP-Z104M)

Article
No.

Output

Output
voltage

Output current
min

Output current
rated load

Output current
max load

Ripple &
noise

SNP-Z106M

A1

+5 V

0 A

20 A

26 A

<50 mVss

SNP-Z107M

A1

+12 V

0 A

9 A

11 A

<100 mVss

SNP-Z108M

A1

+15 V

0 A

7 A

8.7 A

<100 mVss

SNP-Z109M

A1

+24 V

0 A

4.5 A

5.4 A

<100 mVss

SNP-Z10HM

A1

+28 V

0 A

3.8 A

4.65 A

<100 mVss

SNP-Z10TM

A1

+48 V

0 A

2.1 A

2.7 A

<150 mVss

SNP-Z101M

A1
A2
A3

+5 V
+12 V
-12 V

0.5 A
0.3 A
0 A

11.5 A
3 A
0.8 A

15 A
4.1 A
1.1 A

<50 mVss
<120 mVss
<120 mVss

SNP-Z104M

A1
A2
A3

+5 V
+15 V
-15 V

0.5 A
0.3 A
0 A

10 A
2.5 A
0.8 A

15A
4.1 A
1.1 A

<50 mVss
<150 mVss
<150 mVss

100 W continuous power without fan (SNP-Z106M 100 W / +40 °C, 80 W / +50 °C). For fan cooling at 130 W output power an 18CFM (30 m3 / h) fan is required, at 120 W a 10CFM (17 m3 / h) fan is required. Ripple and noise was measured by a 15 MHz bandwidth limited oscilloscope with connected 47 µF electrolytic and 0.47 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.

Optional accessories

Article-No.

Designation
Connecting cables For SNP-Z10 and SNP-Z10M series link to the product
Chassis For SNP-Z07, SNP-Z10 and SNP-Z10M series link to the product
X1-024 AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open link to the product
Technical documentation:
Data Sheet (pdf, 0.7 MB)
Declaration of conformity (pdf, 0.5 MB)
© 2008-2012  |  BICKER ELEKTRONIK GmbH - Ludwig-Auer-Straße 23 - 86609 Donauwörth (DE)
Phone +49 (0)906 / 70595-0 - Fax +49 (0)906 / 70595-55