DC80W
80 Watt
- Extremely small and space saving
- High efficiency up to 90 %
- Ideal for low-budget applications
The extremely flat and very slender ATX DC/DC converter has been designed for installation in closed, fanless box computers. It is characterized by a very high efficiency and a low thermal dissipation rate. Due to its robust construction and high-quality components it is ideal for implementation in industrial and medical devices. A firmly connected cable harness is standard.
| Technical data |
|
|---|---|
| Input voltage |
12 VDC (11.4…12.6 VDC) |
| Input current |
11 A max. (12 VDC) |
| Efficiency |
90 % at nominal load |
| Power-Good-Signal |
Switch on delay 100…500 ms |
| Protection |
Input: Inverse-polarity protection, no |
| Insulation voltage |
Non-isolated input / output |
| Operating temperature |
0…+50 °C |
| Derating |
Depending on operating temperature and power a Gap Pad® or fan may be required. The board temperature should not exceed +60 °C. |
| Storage temperature |
-20…+70 °C |
| Operating humidity |
10…90 % RH, non-condensing |
| Dimensions (WxDxH) |
146 x 28 x 22 mm ±0.5 mm |
| Weight (net) |
0.12 kg |
|
Article |
Output |
Output |
Output |
Output |
Load |
Ripple & |
|---|---|---|---|---|---|---|
| DC80W |
+3.3 V |
0 A |
6 A |
8 A |
±5 % |
50 mV |
| +5 V |
0 A |
6 A |
8 A |
±5 % |
50 mV |
|
| +12 V |
0.1 A |
4 A |
5 A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.1 A |
0.2 A |
±10 % |
120 mV |
|
| +5 Vsb |
0 A |
1 A |
1.5 A |
±5 % |
100 mV |
Max. power is 80 W. Without galvanic isolation!
This unit is for assembly purposes only and it must not be operated in unassembled condition.The final assembly has to comply with the valid EMC standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| TRG100A | link to the product | |
| SNP-Z10 series | link to the product | |
| SNP-A12 | link to the product | |
| SNP-Z10M series | link to the product | |
