BEP-520H
200 Watt
- 150 Watt continuous fanless power!
- Excellent regulation
- Temperarture range -10…+70 °C
Thanks to an innovative circuit design, the 200 W industrial PC power supply is characterized by an excellent voltage regulation. And as far as output is concerned, no base load is required. Additionally, at full load, an improvement of efficiency to 83% could be achieved. The +5 Vsb output is a novelty and can withstand loads of up to 3 A. The BEP-520H is suitable for installation in fanless industry computers. The DC harness is firmly attached to the power supply.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC, active PFC |
| Input frequency |
47…63 Hz |
| Input current |
3 A (115 VAC) / 1.5 A (230 VAC) |
| Inrush current |
35 A (115 VAC) / 70 A (230 VAC) |
| Efficiency |
≥83 % (at full load and 230 VAC) |
| Standby consumption |
App. 1.5 W |
| Hold up time |
>100 msec at 115 VAC and full load |
| Power-Good-Signal |
Switch on delay 100…550 msec, Switch off delay 1 msec |
| Protection |
Short circuit protection: At each output, switch off |
| Earth leakage current |
<3.5 mA |
| Safety / EMC |
TÃœV, UL, CB, CE, CCC |
| Operating temperature |
-10…+70 °C |
| Derating |
From +40…+70 °C, 1.33 % / °C |
| MTBF |
172 700 h at +50 °C according to MIL-HDBK-217F, Notice 2 |
| Storage temperature |
-20…+80 °C |
| Operating humidity |
20…80 % RH, non-condensing, 10…90 % out of commission |
| Dimensions (WxDxH) |
100 x 186 x 39.5 mm ±0.5 mm |
| Weight (net) |
0.96 kg |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| BEP-520H |
+3.3 V |
0 A |
12 A |
±5 % |
50 mV |
| +5 V |
0 A |
14 A |
±5 % |
50 mV |
|
| +12 V |
0.1 A |
15.5 A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.5 A |
±10 % |
120 mV |
|
| +5 Vsb |
0 A |
3 A |
±5 % |
50 mV |
Output power at +3.3 V, +5 V, +12 V and -12 V is 135 W without fan, 185 W with 15CFM fan. Output power at +3.3 V and +5 V is 50 W without fan, 70 W with 15CFM fan. 150 W power can be supplied without fan, and 200 W full power using a 15CFM fan.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| BEP-520H-COVER | BEP-520H-COVER | link to the product |
| X1-024 | AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open | link to the product |
