BEP-510
120 Watt
- 100 Watt continuous fanless power!
- Operating temperature 0…+70 °C
- Efficiency up to 84 %
The ATX PC power supply BEP-510 is designed for the installation into fanlessly operating computers for industrial applications. Its innovative circuit design focuses on a high degree of efficiency, which is 84 % at nominal load. The DC cable harness is firmly connected to the unit. For applications with DC input the related model BEP-510C is available.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC (130…367 VDC), active PFC |
| Input frequency |
47…63 Hz |
| Input current |
2 A (115 VAC) / 1 A (230 VAC) |
| Inrush current |
30 A (115 VAC) / 70 A (230 VAC) |
| Efficiency |
≥80 % (at max load and 115 VAC) |
| Hold up time |
>41 msec at 115 VAC and max load |
| Power-Good-Signal |
Switch on delay 100…550 ms |
| Protection |
Short circuit protection: at each output, switch off |
| Earth leakage current |
<3,5 mA |
| Safety / EMC |
CE, UL 60950-1, TÃœV: EN 60950-1 |
| Operating temperature |
0…+70 °C, start at -10 °C |
| Derating |
See pdf data sheet |
| MTBF |
202 000 h at +50 °C without fan according to MIL-HDBK-217F |
| Storage temperature |
-20…+70 °C |
| Operating humidity |
5…95 % RH, non-condensing |
| Dimensions (WxDxH) |
83.8 x 165 x 40 mm ±0.4 mm |
| Weight (net) |
0.6 kg |
|
Article |
Output |
Output current |
Output current |
Voltage |
Ripple & |
|---|---|---|---|---|---|
| BEP-510 |
+3.3 V |
0 A |
12 A |
±5 % |
50 mV |
| +5 V |
0 A |
14 A |
±5 % |
50 mV |
|
| +12 V |
0 A |
8 A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.5 A |
±10 % |
120 mV |
|
| +5 Vsb |
0 A |
1.5 A |
±5 % |
50 mV |
Output power at +3.3 V, +5 V, +12 V and -12 V is 93 W (without fan). 100 W power can be supplied without fan, and 120 W full power using a 20 CFM fan. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 100 µF tantalum capacitor and 0.1 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| X1-024 | AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open | link to the product |
| BEP-510-COVER | BEP-510 Cover | link to the product |
