BEH-620
200 Watt
- Temperature controlled ball-bearing fan
- TÜV-approved up to +50 °C
- +3.3 V sense line
The BEH-620 provides a temperature controlled fan regulation for noise optimisation. By its rugged design the BEH-620 guarantees a long service life even under demanding industrial conditions. Only components of high quality designed for an ambient tem-perature of +50 °C were used for the assembly. With its generally very good regulation properties the BEH-620 supplies stable output voltages also at relatively low minimum loads.
| Product profile |
|
|---|---|
| Type |
AC/DC / DC/DC, 1U |
| Output power |
200 Watt |
| Input voltage |
90…264 VAC, 120…380 VDC, active PFC |
| Dimensions (WxDxH) |
100 x 190 x 40 mm, ±0.5 mm |
| Warranty |
3 Years |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| BEH-620 |
+3.3 V |
0 A |
14 A |
±5 % |
60 mV |
| +5 V |
1 A |
23 A |
±5 % |
50 mV |
|
| +12 V |
1 A |
12 A |
±5 % |
120 mV |
|
| -12 V |
0.1 A |
0.5 A |
±10 % |
120 mV |
|
| -5 V |
0 A |
0.2 A |
±10 % |
100 mV |
|
| +5 Vsb |
0.1 A |
2 A |
±5 % |
60 mV |
Max. output is 200 W, combined at +3.3 V, +5 V and +12 V it is 185 W. Combined max. output current at +3.3 V and +5 V must not exceed 25 A. From a load of +12 V / >8 A onwards a minimum load of >2 A must be connected at +5 V, from a load of +5 V / >17 A onwards a minimum load of >2 A must be connected at +12 V. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 220 µF electrolytic capacitor and 0.1 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
