DC2412
110 Watt
- DC/DC converter 24 V to 12 V
- 18…30 V DC input range
- High efficiency up to 93 %
The particularly small DC-DC converter generates a controlled output voltage of 12 V DC. It has been designed for direct supply of single-board computers (SBC) or their peripherals from 24 V DC. The DC2412 is characterized by high efficiency and low heat loss. Suitable for use in industrial and medical devices it is of robust construction and built from high-quality components.
| Technical data |
|
|---|---|
| Input voltage |
18…30 VDC |
| Input current |
6.7 A max. (18 V DC) |
| Inrush current |
App. 70 A at +25 °C |
| Efficiency |
89…93 % |
| Protection |
Short circuit protection: Switch off |
| Insulation voltage |
No separation between input and output |
| Operating temperature |
-10…+70 °C |
| Derating |
+50…+70 °C, 2.6 W / °C |
| Storage temperature |
-25…+70 °C |
| Operating humidity |
10…90 % RH, non-condensing |
| Dimensions (WxDxH) |
44.6 x 79 x 18 mm ±0.5 mm |
| Weight (net) |
0.04 kg |
| Product-specific data |
|---|
| Load dump |
On demand |
| Input capacitance |
<270 µF |
|
Article |
Output |
Output current |
Output current |
Output current |
Load |
Line |
Ripple & |
|---|---|---|---|---|---|---|---|
| DC2412 |
+12 V |
0 A |
9.3 A |
11.5 A |
±5 % |
±1 % |
125 mV |
Max. output power must not exceed 110 W. Ripple and noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 470 nF ceramic capacitor at each output. For connection to a low voltage mains supply an additional input filter may be required.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled conditions. The final assembly has to comply with the valid EMC and safety standards.
