SNP-Z05 series
50 Watt
- For medical and industrial applications
- IEC / EN60601-1 and EN60950 certified
- Operating temperature 0…+60 °C
The units of the SNP-Z05 series are ideal power supplies for medical and industrial applications. The series has an operating ambient temperature of up to +60 °C and its cost-performance ratio is extremely favourable. High-grade components are the basis for the high MTBF.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC |
| Input frequency |
47…63 Hz |
| Input current |
2 A / 115 VAC, 1 A / 230 VAC |
| Inrush current |
<30 A / 115 VAC, <60 A / 230 VAC |
| Efficiency |
73…86 %, depending on model |
| Hold up time |
App. 14 ms / 115 VAC, app. 20 ms / 115 VAC (SNP-Z05B, SNP-Z056) |
| Protection |
Short circuit protection: Switch off with auto-recovery |
| Insulation voltage |
Input / Ground 2837 VDC |
| Line regulation |
±0.5 % at rated load and input voltage change of ±10 % |
| Load regulation |
±1.5 % (load step ±40 % related to 60 % load, without fan) SNP-Z05B |
| Earth leakage current |
<300 µA max. (240 VAC / 60 Hz) |
| Safety / EMC |
TÜV (IEC / EN60601-1, 60950) / UL (UL60601-1, 60950), (SNP-Z05B, SNP-Z056 no UL60950) |
| Operating temperature |
0…+60 °C |
| Derating |
In the range of 50…60 °C, 2 % / K |
| MTBF |
>280 000 h at +50 °C, according to MIL-HDBK-217F (depending on model) |
| Storage temperature |
-40…+75 °C |
| Operating humidity |
10…90 % RH, non-condensing |
| Dimensions (WxDxH) |
50.8 x 101.6 x 30.9 mm ±0.5 mm |
| Weight (net) |
0.15 kg |
| Product-specific data |
|---|
| Fan |
At full load a fan with 3 CFM (5.1 m3/h) air flow rate is required. |
|
Article |
Output |
Output current |
Output current |
Output current |
Ripple & |
Efficiency |
|---|---|---|---|---|---|---|
| SNP-Z05B |
+3.3 V |
0 A |
8 A |
10 A |
50 mVss |
73 % |
| SNP-Z056 |
+5 V |
0 A |
7 A |
9 A |
50 mVss |
76 % |
| SNP-Z057 |
+12 V |
0 A |
4.6 A |
5.4 A |
60 mVss |
83 % |
| SNP-Z058 |
+15 V |
0 A |
3.7 A |
4.3 A |
75 mVss |
83 % |
| SNP-Z059 |
+24 V |
0 A |
2.3 A |
2.7 A |
120 mVss |
85 % |
| SNP-Z05T |
+48 V |
0 A |
1.15 A |
1.35 A |
240 mVss |
86 % |
Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 0.47 µF ceramic capacitor (SNP-Z05B / -Z056: 0.56 µF ceramic capacitor) at the output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| CB-Z05 | DC cable harness for SNP-Z05X series | link to the product |
| X1-054 | AC input cable harness for SNP-Z05X series | link to the product |
