P1H-5500V
500 Watt
- Efficiency up to 86 %
- Silent due to regulated fan
- TÜV approved up to +50 °C
Due to its high efficiency and the temperature-controlled fan the noise development of the P1H-5500V is only minimal. Its robust construction guarantees a long service life under industrial operating conditions. All equipped components are of high quality and designed for an operating temperature of +50 °C. The regulation properties of the P1H-5500V are very good. A special cable harness is optionally available for the P1H-5500V.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC, active PFC |
| Input frequency |
47…63 Hz |
| Input current |
8 A (115 VAC) / 4 A (230 VAC) |
| Inrush current |
40 A (115 VAC) / 60 A (230 VAC) |
| Efficiency |
82…86 % |
| Hold up time |
>16 msec |
| Power-Good-Signal |
Switch on delay 100…500 msec |
| Protection |
Short circuit protection: +3.3 V, +5 V, +12 V, switch off / -12 V, +5 Vsb, auto recovery |
| Earth leakage current |
<3.5 mA, 115 VAC/230 VAC |
| Safety / EMC |
TÜV, UL, CB, CE |
| Operating temperature |
0…+50 °C |
| Storage temperature |
-20…+80 °C |
| Operating humidity |
20…80 % RH, non-condensing |
| Dimensions (W x D x H) |
100 x 225 x 40.5 mm ±0.5 mm |
| Weight (net) |
1.65 kg |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| P1H-5500V |
+3.3 V |
0.5 A |
25 A |
±5 % |
60 mV |
| +5 V |
0.5 A |
25 A |
±5 % |
60 mV |
|
| +12 V |
2 A |
40 A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.8 A |
±10 % |
120 mV |
|
| +5 Vsb |
0.1 A |
3.5 A |
±5 % |
60 mV |
Max. output power is 500 W, combined output current at +3.3 V and +5 V must not exceed 35 A. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 100 μF electrolytic capacitor and 100nF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
