P1S-6300V
300 Watt
- Efficiency up to 83 %
- Silent due to fan regulation
- TÜV approval up to +50 °C
Thanks to its high efficiency and a temperature-regulated fan the noise produced by the P1S-6300V is minimal. Its robust construction ensures a long service-life under industrial operating conditions. All equipped components are of high-grade quality and designed for an ambient temperature of +50 °C. The regulation properties of the P1S-6300V are very good. Upon request the P1S-6300V is also available with a special cable harness.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC, active PFC |
| Input frequency |
47…63 Hz |
| Input current |
4.5 A (115 V) / 2 A (230 V) |
| Inrush current |
70 A (115 VAC) / 140 A (230 VAC) |
| Efficiency |
≥80…83 %, 230 VAC |
| Hold up time |
>16 msec |
| Power-Good-Signal |
Switch on delay 100…500 msec |
| Protection |
Short circuit protection: +3.3 V, +5 V, +12 V, switch off / -12 V, +5 Vsb, auto recovery |
| Earth leakage current |
<3,5 mA, 115 VAC/230 VAC |
| Safety / EMC |
TÜV, UL, CE |
| Operating temperature |
0…+50 °C |
| MTBF |
140 000 h at +25 °C, with fan |
| Storage temperature |
-20…+80 °C |
| Operating humidity |
20…80 % RH, non-condensing |
| Dimensions (W x D x H) |
150 x 81.5 x 40.3 mm, ±0.5 mm |
| Weight (net) |
1.3 kg |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| P1S-6300V |
+3.3 V |
0.5 A |
17 A |
±5 % |
60 mV |
| +5 V |
1 A |
18 A |
±5 % |
60 mV |
|
| +12 V1 |
0 A |
8 A |
±5 % |
120 mV |
|
| +12 V2 |
2 A |
16A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.3 A |
±10 % |
120 mV |
|
| +5 Vsb |
0.1 A |
2.5 A |
±5 % |
60 mV |
Max. output power is 300 W, combined at +3.3 V and +5 V 120 W. Ripple and noise was measured by a 20 MHz oscilloscope with connected 100 μF electrolytic capacitor and 0.1 μF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
