BEP-510 / AC input / Industrial PC PSUs / Products / Bicker Elektronik

BEP-510

120 Watt

100 Watt continuous fanless power!
Operating temperature 0…+70 °C
Efficiency up to 84 %

The ATX PC power supply BEP-510 is designed for the installation into fanlessly operating computers for industrial applications. Its innovative circuit design focuses on a high degree of efficiency, which is 84 % at nominal load. The DC cable harness is firmly connected to the unit. For applications with DC input the related model BEP-510C is available.

BEP-510, Industrial PC Power Supply with AC input

Technical data
Input voltage	90…264 VAC (130…367 VDC), active PFC
Input frequency	47…63 Hz
Input current	2 A (115 VAC) / 1 A (230 VAC)
Inrush current	30 A (115 VAC) / 70 A (230 VAC)
Efficiency	≥80 % (at max load and 115 VAC)
Hold up time	>41 msec at 115 VAC and max load
Power-Good-Signal	Switch on delay 100…550 ms Switch off delay 1 ms
Protection	Short circuit protection: at each output, switch off Overload protection: 110…160 %, switch off Overvoltage protection: switch off, +3.3 V (3.6…4.3 V), +5 V (5.6…6.5 V), +12 V (13.2…15 V) Overtemperature protection: switch off
Earth leakage current	<3,5 mA
Safety / EMC	CE, UL 60950-1, TÜV: EN 60950-1
Operating temperature	0…+70 °C, start at -10 °C
Derating	See pdf data sheet
MTBF	202 000 h at +50 °C without fan according to MIL-HDBK-217F
Storage temperature	-20…+70 °C
Operating humidity	5…95 % RH, non-condensing
Dimensions (WxDxH)	83.8 x 165 x 40 mm ±0.4 mm
Weight (net)	0.6 kg

Article No.	Output voltage	Output current max	Voltage regulation	Ripple & noise
BEP-510	+3.3 V	12 A	±5 %	50 mV
	+5 V	14 A	±5 %	50 mV
	+12 V	8 A	±5 %	120 mV
	-12 V	0.5 A	±10 %	120 mV
	+5 Vsb	1.5 A	±5 %	50 mV

Output power at +3.3 V, +5 V, +12 V and -12 V is 93 W (without fan). 100 W power can be supplied without fan, and 120 W full power using a 20 CFM fan. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 100 µF tantalum capacitor and 0.1 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.

Article-No.	Designation
Optional accessories
X1-024	AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open	link to the product
BEP-510-COVER	BEP-510 Cover	link to the product

Technical documentation:

Data Sheet (pdf, 1.3 MB)

Declaration of conformity (pdf, 0.2 MB)

Operating instructions (pdf, 0.6 MB)

What the red symbols will tell you... Whenever one of our products distinguishes itself by special characteristics it is marked with a corresponding red symbol. This way we want to point out the particular characteristics of the product at a glance.
	As compared to the common industrial temperature range (0...+50 °C) the product offers an extended temperature range.
	Our delivery guarantee for this product is 5 years.
	The product was especially designed for medical applications.
	Fanless operation is possible. Passive cooling is provided by contact with the chassis and by natural convection.
	Saves energy and is environmental-friendly due to its efficiency of at least 80 % at nominal load.
	The Premium sign marks products with exceptional performance as compared to other products of this category. Detailed information regarding an individual product is available upon request.
	This product is designed for 24/7 continuous operation.
By the way: These symbols you will find not only on our website. In our catalogue as well they will assist you in your decision-making.

BEP-510

120 Watt

What the red symbols will tell you...