SNP-Z30 series
300 Watt
- 300 Watt continuous fanless power
- High efficiency up to 90 %
- Installation height only 40.6 mm
The SNP-Z30 power supply series is distinguished by its very high efficiency ranging from5 to 90 %. Thus, it can supply 300 W continuous power up to an operating ambient temperature of +50 °C. The complete operating ambient temperature range even extends from 0 °C to +70 °C. The use of high-grade components guarantees a long lifetime for the SNP-Z30 series. Additionally, all models are equipped with overload, short circuit and overvoltage protection.
| Techical data |
|
|---|---|
| Input voltage |
85…264 V AC, active PFC |
| Input frequency |
47…63 Hz |
| Input current |
4 A (115 V AC), 2 A (230 V AC) |
| Inrush current |
<30 A (115 V AC), <60 A (230 V AC), +25 °C |
| Efficiency |
85…90 %, depending on model |
| Hold up time |
App. 20 ms (115 V AC) |
| Protection |
Short circuit protection: Switch off with auto-recovery |
| Line regulation |
±1 % at rated load and input voltage change of ±10 % |
| Load regulation |
±1 % (A1, A2, load step ±40 % related to 60 % rated load, 230 VAC) |
| Safety / EMC |
TÜV / UL / CB / CE |
| Operating temperature |
0…+70 °C |
| Derating |
In the range from 50 to +70 °C, 2.5 % / °C |
| Storage temperature |
-20…+85 °C |
| Operating humidity |
10…95 % RH, non-condensing |
| Dimensions |
228.6 x 127 x 40.6 mm |
| Weight (net) |
1.05 kg |
| Product-specific data |
|---|
| Remote sense |
Regulation range 0.5 V, at A1 |
| Convection-cooled |
300 W: SNP-Z307, SNP-Z301, SNP-Z306, SNP-Z309 |
| Fan-cooled |
360 W: 18CFM (31 m3/h) SNP-Z301, SNP-Z306, SNP-Z307 |
|
Article |
Output |
Output |
Output current |
Output current |
Output current |
Ripple & |
Efficiency |
|---|---|---|---|---|---|---|---|
| SNP-Z301 |
A1 |
+5 V |
0 A |
32 A |
45 A |
<50 mVss |
85 % |
| SNP-Z307 |
A1 |
+12 V |
0 A |
25 A |
30 A |
<120 mVss |
88 % |
| SNP-Z309 |
A1 |
+24 V |
0 A |
12 A |
14.6 A |
<240 mVss |
88 % |
| SNP-Z30T |
A1 |
+48 V |
0 A |
6.25 A |
7.3 A |
<200 mVss |
90 % |
Ripple and noise was measured by a 15 MHz bandwidth limited oscilloscope with connected 47 µF electrolytic capacitor and 0.47 µF ceramic capacitor at each output (SNP-Z307: 10 µF electrolytic capacitor and 0.47 µF ceramic capacitor, SNP-Z309 / -Z30T: only with 0.47 µF ceramic capacitor).
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.




