SNP-Z20 series

200 Watt

  • 200 Watt continuous fanless power
  • High efficiency up to 85 %
  • Installation height only 38.1 mm

The SNP-Z20 power supply series is distinguished by its very high efficiency ranging from 80 to 85 %. Thus, it can supply 200 W continuous fanless power up to an operating ambient temperature of +50 °C. The complete operating ambient temperature range even extends from 0 °C to +70 °C. By its high-grade components as well as by its overload, short circuit and overvoltage protection the SNP-Z20 series reaches its high MTBF of over 300 000 h.

Technical data

 

Input voltage

85…264 V AC, active PFC

Input frequency

47…63 Hz

Input current

4 A (115 VAC), 2 A (230 VAC)

Inrush current

<30 A (115 VAC), <60 A (230 VAC), +25 °C

Efficiency

App. 85 %, SNP-Z201 app. 80 %, at 230 VAC and convection-cooled

Hold up time

App. 20 ms (115 VAC)

Protection

Short circuit protection: Switch off with auto-recovery
Overload protection: Switch off with auto-recovery
Overvoltage protection: Switch off (model / response threshold) SNP-Z207 (13.1 V…15.1 V),
SNP-Z208 (17.6 V…20.1 V), SNP-Z209 (26 V…31 V), SNP-Z20T (51 V…60 V), SNP-Z201, -Z206 (5.7 V…7 V)
Overtemperature protection: yes

Line regulation

±1 % at rated load and input voltage change of ±10 %

Load regulation

±1 % (A1 Load step ±40 % related to 60 % load, 230 VAC)
±5 % (A2 Load step ±40 % related to 60 % load, 230 VAC)

Earth leakage current

<3.5 mA

Safety / EMC

TÜV, UL, CB, CE

Operating temperature

0…+70 °C

Derating

In the range of +50…+70 °C, 2.5 % / °C, (SNP-Z201 max. +50 °C)

MTBF

App. 300 000 h according to MIL-HDBK-217F at +25 °C

Storage temperature

-20…+85 °C

Operating humidity

10…90 % RH, non-condensing

Dimensions

203.2 x 106.7 x 38.1 mm
Tolerances: Mounting points: ±0.5 mm, all other dimensions ±0.8 mm

Weight (net)

0.6 kg

Product-specific data

Remote sense

Regulation range 0.5 V, at A1

Max. capacitive load

SNP-Z206: 30000 µF, -Z207, -Z208: 6000 µF, -Z209: 2000 µF, -Z20T: 1000 µF

Convection-cooled

180 W: SNP-Z206, 200 W: SNP-Z207, -Z208, -Z209, -Z20T, -Z201

Fan-cooled

225 W: 18CFM (31 m3 / h), SNP-Z206,
250 W: 18CFM (31 m3 / h), SNP-Z207, -Z208, -Z209, -Z20T, -Z201

Article
No.

Output

Output
voltage

Output current
min

Output current
 rated load

Output current
 max load

Ripple &
noise

Efficiency

SNP-Z206

A1

+5 V

1 A

36 A

45 A

<50 mVss

85 %

SNP-Z207

A1

+12 V

0 A

17 A

21 A

<100 mVss

85 %

SNP-Z208

A1

+15 V

0 A

13.5 A

17 A

<100 mVss

85 %

SNP-Z209

A1

+24 V

0 A

8.5 A

10.5 A

<100 mVss

85 %

SNP-Z20T

A1

+48 V

0 A

4.3 A

5.2 A

<100 mVss

85 %

SNP-Z201

A1
A2
A3

+5 V
+12 V
12 V isolated

2 A
0 A
0 A

20 A
6 A
2 A

25 A
8 A
3 A

<50 mVss
<120 mVss
<120 mVss

80 %
80 %
80 %

SNP-Z201: Output A3 is galvanically isolated from A1 and A2. Ripple and noise was measured by a 15 MHz bandwidth limited oscilloscope with connected 0.47 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.

Technical documentation: