OZP-170 series
210 Watt
- 168 Watt continuous fanless power
- Exceptionally rugged and long-lasting
- High efficiency up to 86 %
OZP-170 single voltage power supplies stand out through their high peak performance. Thus they are ideal for e.g. high-performance thermo transfer printers. Output voltage for the OZP-170-12/15 is selectable as required between 12 V and 15 V. In the „-JB0“ version the OZP-170-24 is also available with a backup function. In case of a power failure the output is supplied via the NiMH battery pack.
| Technical data |
|
|---|---|
| Input voltage |
85…264 VAC, active PFC |
| Input frequency |
47…63 Hz |
| Input current |
Max. 2.6 A / 100 VAC, max. 1.4 A / 200 VAC |
| Inrush current |
<17 A / 100 VAC, <34 A / 200 VAC, +25 °C |
| Efficiency |
82…86 % |
| Hold up time |
App. 20 ms |
| Protection |
Short circuit protection: Switch off with auto-recovery |
| Line regulation |
<94 mV |
| Load regulation |
<150 mV |
| Earth leakage current |
<0.5 mA / 200 VAC |
| Safety / EMC |
TÜV, UL, CE |
| Operating temperature |
-10…+70 °C |
| Derating |
Depending on mounting position and temperature (see diagrams in data sheet) |
| MTBF |
>268 000 h according to EI AJRCR-9102 |
| Storage temperature |
-20…+75 °C |
| Operating humidity |
20…90 % RH, non-condensing |
| Dimensions |
73 x 40 x 222 mm ±0.5mm |
| Weight (net) |
0.5 kg, 0.8 kg with cover |
| Product-specific data |
|---|
| OZP-170-12/15 |
Change-over via jumper CN9 (12 V CN9 plugged, 15 V CN9 open) |
| Adjustment range |
OZP-170-12 /15: ±10 %, OZP-170-12/15 : -5 % / +10 %, OZP-170-24: -5 % / +20 % |
| Backup function |
OZP-170-24 with battery packs BS14A-H24/2.5L |
|
Article |
Output |
Output |
Output |
Output |
Output |
Ripple & |
Efficiency |
|---|---|---|---|---|---|---|---|
| OZP-170-12 /15 |
+12 V |
0 A |
14 A |
17.5 A |
22.5 A |
<180 mVss |
85 % |
| OZP-170-12/15 |
+15 V |
0 A |
11.2 A |
14 A |
18 A |
<180 mVss |
85 % |
| OZP-170-24 |
+24 V |
0 A |
7 A |
14 A |
8.8 A / 12.5 A |
<180 mVss |
85 % |
Max. continuous power is 168 W (convection), 210 W (fan cooling), 270 W (Peak OZP-170-12/15) and 300 W (Peak OZP-170-24). Peak load can be for 10 sec. Ripple and noise was measured by a 100 MHz-oscilloscope with connected 10 μF electrolytic capacitor and 100 nF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
