BEO-3500M
350 Watt
- Complies with IEC/EN60601-1 – 3rd Edition
- Fanless operation
- Extremely compact design
The power supply series BEO-3500M is characterized by high performance and small dimensions. Thanks to its high efficiency it provides up to 350 watts without the necessity for any active cooling. Additionally it is equipped with +5Vsb, auxiliary voltage, a remote On/Off function and load-sense connections for output voltage adjustment. High quality of the installed parts and a superior circuit design guarantee maximum reliability and long service life.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC, active PFC |
| INput frequency |
47…63 Hz |
| Input current |
5 A (115 V AC), 2 A (230 V AC) |
| Inrush current |
<50 A (240 VAC) |
| Efficiency |
89…93 % depending on model |
| Standby consumption |
<2 W at 0 A load |
| Hold up time |
App. 16 ms |
| Protection |
Short circuit protection: Switch off with auto recovery |
| Line regulation |
±0,5 % at nominal load and input voltage change from 90 to 264 VAC |
| Load regulation |
±1 % (A1, load step ±40 % related to 60 % nominal load) |
| earth leakage current |
<300 µA max. |
| Safety / EMC |
TÜV (IEC/EN60601-1 3rd Edition), UL (UL60601-1), CE |
| Operating temperature |
-20…+70 °C |
| Derating |
See diagram on data sheet |
| MTBF |
100 000 h at +25 °C / 115 V AC according to MIL-HDBK-217F |
| Storage temperature |
-40…+85 °C |
| Operating humidity |
5…93 % RH, non-condensing |
| Dimensions (WxDxH) |
101.6 x 165 x 34 mm ±1 mm |
| Weight (net) |
0.64 kg |
| Product-specific data |
|---|
| Remote sense |
Adjustment range 0.5 V (CN5) |
| Max operation height |
3000 m |
| Adjustment range (VR) |
±5 % |
| PSON |
ATX compatible (CN5), Power on at bridge from PIN5 to PIN6 |
|
Article |
Output |
Output |
Output current |
Output current |
Output current |
Ripple & |
Efficiency |
|---|---|---|---|---|---|---|---|
| BEO-3505M |
A1 |
+5 V |
0 A |
40 A |
60 A |
<100 mVss |
89 % |
| BEO-3512M |
A1 |
+12 V |
0 A |
25 A |
29.2 A |
<120 mVss |
92 % |
| BEO-3524M |
A1 |
+24 V |
0 A |
12,5 A |
14.6 A |
<240 mVss |
93 % |
| BEO-3548M |
A1 |
+48 V |
0 A |
6,25 A |
7.3 A |
<480 mVss |
93 % |
350 W continuous power with 10 CFM fan (-20…+50 °C). From +50…+70 °C 2.5% / K. Fanless operation see derating diagrams. Ripple and Noise was measured by a 20 MHzbandwidth limited oscilloscope with connected 100 nF and 47 µF capacitors at the output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| X1-024 | AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open | link to the product |
| X1-061 | AC input cable harness / 3 pole / Length: 600 mm / AWG18 / Ends open | link to the product |




