BEP-510C-B4
120 Watt
- Improved vibration protection according to EN 60945
- 100 Watt continuous fanless power!
- Operating temperature up to +70 °C
The ATX PC power supply BEP-510C-B4 is suitable for installation in fanless industry computers. Thanks to a wide input voltage range of 10–36 VDC the BEP-510C-B4 covers 12 V as well as 24 V system voltage. The device is designed for use in vibration proof „maritime equipment“ according to EN 60945 and IACS E10 standards. The ATX harness is firmly attached.
| Technical data |
|
|---|---|
| Input voltage |
10…36 VDC |
| Input current |
15 A max. (10 VDC) |
| Inrush current |
15 A max. |
| Efficiency |
>80 % |
| Hold up time |
>2 msec |
| Power-Good-Signal |
Switch on delay 100…500 msec |
| Protection |
Short circuit protection: At each output, switch off, +5 Vsb auto-recovery |
| Insulation voltage |
Input / Chassis: 1500 VAC for 60 sec. |
| Earth leakage current |
3.5 mA |
| Safety / EMC |
CE, designed according to EN 60950-1 and UL 60950-1 |
| Operating temperature |
0…+70 °C |
| Derating |
See data sheet |
| Storage temperature |
-20…+80 °C |
| Operating humidity |
10…90 % RH, non-condensing |
| Dimensions |
152 x 83.8 x 39 mm ±0.4 mm |
| Weight (net) |
0.5 kg |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| BEP-510C-B4 |
+3.3 V |
0 A |
12 A |
±5 % |
50 mV |
| +5 V |
0 A |
14 A |
±5 % |
50 mV |
|
| +12 V |
0 A |
8 A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.5 A |
±10 % |
120 mV |
|
| +5 Vsb |
0 A |
1 A |
±5 % |
50 mV |
Output power at +3.3 V, and +5 V is 70 W (50 W without fan). 100 W power can be supplied without fan, and 120 W full power using a 20 CFM fan. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| BEP-510C / FILTER B | EMC filter, EN 55022 class B for DC power supply BEP-510C | link to the product |
