SS-650HT-B1 / AC input / Industrial PC PSUs / Products / Bicker Elektronik

SS-650HT-B1

650 Watt

For low-budget applications
Silent due to 120 mm fan
Powerful +12 V, 4 channels

The SS-650HT-B1 is a reliable PC power supply for less demanding industrial and office systems. With its excellent price-performance ratio it is a popular solution for applications where costs are a critical factor. Due to the very precise adjustment of the fan regulation with the 120 mm fan noise development is kept extremely low. With its high efficiency it operates in a most energy-saving way over the whole range of performance.

SS-550HT-B1/SS-650HT-B1, 550–650 Watt, Industrial PC power supply with ac input, for low-budget applications

Technical data
Input voltage	90…264 VAC
Input frequency	47…63 Hz
Input current	10 A max
Inrush current	100 A (264 VAC)
Efficiency	80–84 %
Standby consumption	<1 W (OFF-Mode) / 230 VAC
Hold up time	>12 msec
Power-Good-Signal	Switch on delay 100…500 ms Switch off delay 1 ms
Protection	Short circuit protection: At each output, switch off / +5 Vsb, auto recovery Overload protection: 110…135 %, switch off Overvoltage protection: +3.3 V (+3.76…+4.3 V), +5 V (+5.74…+7 V), +12 V (+13.4…+15.6 V)
Earth leakage current	<3.5 mA, 250 VAC
Safety / EMC	CB, TÜV, UL, CE
Operating temperature	0…+50 °C
Derating	From +40…+50 °C, 2 % / °C
MTBF	100 000 h at +25 °C
Storage temperature	-40…+85 °C
Operating humidity	20…80 %, non-condensing
Dimensions (WxDxH)	150 x 140 x 86 mm ±0.5 mm
Weight (net)	2.4 kg

Product-specific data

Sound level

<35 dB(A)

Article No.	Output voltage	Output current min	Output current max	Output current peak	Load regulation	Ripple & Noise
SS-650HT-B1	+3.3 V	0.5 A	24 A		±5 %	50 mV
	+5 V	0.3 A	30 A		±5 %	50 mV
	+12 V1, V2, V3, V4	1 A	4x 18 A	21 A	±3 %	120 mV
	-12 V	0 A	0.8 A		±10 %	120 mV
	+5 Vsb	0.1 A	3 A	3.5 A	±5 %	50 mV

Max. output power is 650 W, combined output current at +3.3 V and +5 V must not exceed 38 A (170 W). Combined output current at 12 V1, V2, V3 und V4 must not exceed 41 A. Peak output power is 715 W for 1 second. Ripple and noise was measured by a 20 MHz oscilloscope with connected 10 μF electrolytic capacitor and 0.1μF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.

Article-No.	Designation
Optional accessories
X1-132	X1-132, power cord with shockproof plug/rubber connector	link to the product

Technical documentation:

Data Sheet (pdf, 1.3 MB)

Declaration of conformity (pdf, 0.2 MB)

What the red symbols will tell you... Whenever one of our products distinguishes itself by special characteristics it is marked with a corresponding red symbol. This way we want to point out the particular characteristics of the product at a glance.
	As compared to the common industrial temperature range (0...+50 °C) the product offers an extended temperature range.
	Our delivery guarantee for this product is 5 years.
	The product was especially designed for medical applications.
	Fanless operation is possible. Passive cooling is provided by contact with the chassis and by natural convection.
	Saves energy and is environmental-friendly due to its efficiency of at least 80 % at nominal load.
	The Premium sign marks products with exceptional performance as compared to other products of this category. Detailed information regarding an individual product is available upon request.
	This product is designed for 24/7 continuous operation.
By the way: These symbols you will find not only on our website. In our catalogue as well they will assist you in your decision-making.

SS-650HT-B1

650 Watt

What the red symbols will tell you...