MPI-810H
120 Watt
- 85 Watt continuous fanless power
- Operating temperature up to +70 °C
- Ideal for industrial applications
The ATX PC power supply MPI-810H is designed for industrial and mobile computer systems with low performance requirements. Due to its compact design, fanless operation, and an ambient temperature of up to +70 °C the MPI-810H is a universal solution for various applications. For the quick and easy connection of modules that have to be supplied both an AC and DC cable harness is available.
As a fit-form-compatible variation of the MPI-810H model MPD-810H with an input range of 10...30 VDC is also available.
| Technical data |
|
|---|---|
| Input voltage |
90…260 VAC, 130…367 VDC |
| Input frequency |
47…63 Hz |
| Input current |
3 A (115 VAC) / 1,5 A (230 VAC) |
| Inrush current |
30 A (115 VAC) / 60 A (230 VAC) |
| Efficiency |
>74 % / 230 VAC |
| Hold up time |
16 ms / 115 VAC |
| Protection |
Short circuit protection: At each output, auto recovery |
| Earth leakage current |
16 ms / 115 VAC |
| Safety / EMC |
TÜV / UL / cUL |
| Operating temperature |
0…+50 °C |
| Derating |
2 % / K from +50…+70 °C |
| MTBF |
185 000 h at +50 °C |
| Storage temperature |
-40…+75 °C |
| Operating humidity |
5 % bis 95 %, non-condensing |
| Dimensions |
152.4 x 83.8 x 38 mm ±0,5 mm |
| Weight (net) |
0.6 kg |
| Product-specific data |
|---|
| On/Off ATX function |
The power supply switches as soon as PSON (TB3 PIN2) is connected to GND. |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| MPI-810H |
+3.3 V |
0 A* |
12 A |
3.1…3.5 V |
50 mV |
| +5 V |
1 A* |
14 A |
5.05…5.15 V |
50 mV |
|
| +12 V |
1 A* |
6 A |
11.25…13 V |
120 mV |
|
| -12 V |
0.1 A* |
1 A |
-11.25…-13.3 V |
240 mV |
|
| +5 Vsb |
0 A |
0.75 A |
4.8…5.2 V |
120 mV |
* If the minimum loads are not observed, the output voltages can increase and thus damage the connected consumer loads. The +5 V output can supply up to 14 A if a minimum load of +3.3 V / 1.5 A, +12 V / 1 is connected. The +3.3 V output can supply up to 12 A and the +12 V output up to 5 A if a minimum load of 2 A is connected at +5V.
Output power is 85 W without fan, 100 W with 6CFM fan, and 120 W with 18CFM fan. Combined output power at +3.3 V and +5 V must not exceed 70 W. This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
The power supply does not provide a power factor correction (PFC) circuit. It is however possible to integrate an optionally available PFC upstream inductor.
