BEP-520H / AC input / Industrial PC PSUs / Products / Bicker Elektronik

BEP-520H

200 Watt

150 Watt continuous fanless power!
Excellent regulation
Temperarture range -10…+70 °C

Thanks to an innovative circuit design, the 200 W industrial PC power supply is characterized by an excellent voltage regulation. And as far as output is concerned, no base load is required. Additionally, at full load, an improvement of efficiency to 83% could be achieved. The +5 Vsb output is a novelty and can withstand loads of up to 3 A. The BEP-520H is suitable for installation in fanless industry computers. The DC harness is firmly attached to the power supply.

BEP-520H, 200 Watt, Industrial PC Power supply with AC input

Technical data
Input voltage	90…264 VAC, active PFC
Input frequency	47…63 Hz
Input current	3 A (115 VAC) / 1.5 A (230 VAC)
Inrush current	35 A (115 VAC) / 70 A (230 VAC)
Efficiency	≥83 % (at full load and 230 VAC)
Standby consumption	App. 1.5 W
Hold up time	>100 msec at 115 VAC and full load
Power-Good-Signal	Switch on delay 100…550 msec, Switch off delay 1 msec
Protection	Short circuit protection: At each output, switch off Overload protection: 130…170 %, switch off Overvoltage protection: Switch off, +3.3 V (3.6…4.3 V), +5 V (5.6…6.5 V), +12 V (13.2…15 V) Overtemperature protection: Switch off
Earth leakage current	<3.5 mA
Safety / EMC	TÜV, UL, CB, CE, CCC
Operating temperature	-10…+70 °C
Derating	From +40…+70 °C, 1.33 % / °C
MTBF	172 700 h at +50 °C according to MIL-HDBK-217F, Notice 2
Storage temperature	-20…+80 °C
Operating humidity	20…80 % RH, non-condensing, 10…90 % out of commission
Dimensions (WxDxH)	100 x 186 x 39.5 mm ±0.5 mm
Weight (net)	0.96 kg

Article No.	Output voltage	Output current min	Output current max	Load regulation	Ripple & Noise
BEP-520H	+3.3 V	0 A	12 A	±5 %	50 mV
	+5 V	0 A	14 A	±5 %	50 mV
	+12 V	0.1 A	15.5 A	±5 %	120 mV
	-12 V	0 A	0.5 A	±10 %	120 mV
	+5 Vsb	0 A	3 A	±5 %	50 mV

Output power at +3.3 V, +5 V, +12 V and -12 V is 135 W without fan, 185 W with 15CFM fan. Output power at +3.3 V and +5 V is 50 W without fan, 70 W with 15CFM fan. 150 W power can be supplied without fan, and 200 W full power using a 15CFM fan.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.

Article-No.	Designation
Optional accessories
BEP-520H-COVER	BEP-520H-COVER	link to the product
X1-024	AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open	link to the product

Technical documentation:

Data Sheet (pdf, 1 MB)

Declaration of conformity (pdf, 0.2 MB)

Operating instructions (pdf, 0.6 MB)

What the red symbols will tell you... Whenever one of our products distinguishes itself by special characteristics it is marked with a corresponding red symbol. This way we want to point out the particular characteristics of the product at a glance.
	As compared to the common industrial temperature range (0...+50 °C) the product offers an extended temperature range.
	Our delivery guarantee for this product is 5 years.
	The product was especially designed for medical applications.
	Fanless operation is possible. Passive cooling is provided by contact with the chassis and by natural convection.
	Saves energy and is environmental-friendly due to its efficiency of at least 80 % at nominal load.
	The Premium sign marks products with exceptional performance as compared to other products of this category. Detailed information regarding an individual product is available upon request.
	This product is designed for 24/7 continuous operation.
By the way: These symbols you will find not only on our website. In our catalogue as well they will assist you in your decision-making.

BEP-520H

200 Watt

What the red symbols will tell you...