BEA-576H
760 Watt
- Efficiency up to 86 %
- Excellent regulation
- Designed for continuous operation 24/7
The new BEA-576H PC power supply combines high energy efficiency with the robustness of industry PC power supplies. It ensures safe energy supply for high-performance industry PC’s and computers for image processing applications. Thanks to its high efficiency the BEA-576H also meets the requirements of the 80 PLUS® standard. High quality components and an integrated fan monitoring ensure a long availability of the computer. A new feature with the BEA-576H is a safety clip securing the mains plug from being pulled out inadvertently.
| Technical data |
|
|---|---|
| Input voltage |
90…264 VAC |
| Input frequency |
47…63 Hz |
| Input current |
12 A (115 VAC) / 6 A (230 VAC) |
| Inrush current |
20 A (115 VAC) / 40 A (220 VAC) |
| Efficiency |
83…86 % |
| Standby consumption |
2.4 W |
| Hold up time |
>16 ms |
| Power-Good-Signal |
Switch on delay 100…500 ms |
| Protection |
Short circuit protection: At each output, switch off / +5 Vsb, auto recovery |
| Insulation voltage |
Input / Chassis 3100 VDC |
| Earth leakage current |
<1.5 mA, 250 VAC |
| Safety / EMC |
TÜV, UL, CB, CE, CCC, EN 61000-6-2, EN 61000-6-4 |
| Operating temperature |
0…+60 °C |
| Derating |
From +50…+60 °C, 1 % / °C |
| MTBF |
96 000 h at +50 °C, without fan |
| Storage temperature |
-20…+80 °C |
| Operating humidity |
10…80 % RH, non-condensing, 10…90 % out of service |
| Dimensions (W x D x H) |
150 x 160 x 86 mm ±0.5 mm |
| Weight (net) |
2.6 kg |
|
Article |
Output |
Output current |
Output current |
Load |
Ripple & |
|---|---|---|---|---|---|
| BEA-576H |
+3.3 V |
0 A |
25 A |
±5 % |
50 mV |
| +5 V |
0 A |
25 A |
±5 % |
50 mV |
|
| +12 V |
0.5 A |
55 A |
±5 % |
120 mV |
|
| -12 V |
0 A |
0.8 A |
±5 % |
120 mV |
|
| +5 Vsb |
0.1 A |
3.5 A |
±5 % |
50 mV |
Max. output power is 760 W, combined output current at +3.3 V and +5 V must not exceed 40 A. Ripple and noise was measured by a 20 MHz-oscilloscope with connected 220 μF electrolytic capacitor and 0.1 μF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
