DC2412
110 Watt
- DC/DC converter 24 V to 12 V
- 18…30 V DC input range
- High efficiency up to 93 %
The particularly small DC-DC converter generates a controlled output voltage of 12 V DC. It has been designed for direct supply of single-board computers (SBC) or their peripherals from 24 V DC. The DC2412 is characterized by high efficiency and low heat loss. Suitable for use in industrial and medical devices it is of robust construction and built from high-quality components.
| Product profile |
|
|---|---|
| Type |
DC/DC converter |
| Output Power |
110 Watt |
| Input voltage |
18…30 VDC |
| Dimensions (WxDxH) |
44.6 x 79 x 18 mm ±0.5 mm |
| Warranty |
3 Years |
|
Article |
Output |
Output current |
Output current |
Output current |
Load |
Line |
Ripple & |
|---|---|---|---|---|---|---|---|
| DC2412 |
+12 V |
0 A |
9.3 A |
11.5 A |
±5 % |
±1 % |
125 mV |
Max. output power must not exceed 110 W. Ripple and noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 470 nF ceramic capacitor at each output. For connection to a low voltage mains supply an additional input filter may be required.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled conditions. The final assembly has to comply with the valid EMC and safety standards.
| Optional accessories | ||
Article-No. |
Designation |
|
|---|---|---|
| X1-024 | AC input cable harness / 2 pole / Length: 620 mm / AWG 18 / Ends open | link to product |
| CB-DC2412 | Cable harness for DC/DC converter, 1x P4, Length 200 mm | link to product |
